Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-04-2014, 12:19 PM   #9
Sunseeker
 
sunseeker's Avatar
 
Join Date: Feb 2014
Location: Beccles
Posts: 4
Hi All ..... it goes on...

Jumped relay 8 in the boot and this turned the engine compartment fan, put the relay back in and unplugged the socket to the engine compartment sensor and completed the circuit but fan wouldn't come on... relay tested OK.

Pulled the high an low speed relays, jumped them, left side the fan would not run high or low, right hand side was OK, all relays tested OK.

Started the car up, connected the durametric, couldn't get the temperature up to turn the engine compartment fan on as it needs 80c in the compartment or an engine temperature of 102c, but both low speed (left/right) fans came on when temperature hit 100c (all temperaures switching as shown in workshop manual)... being cold here in the UK 7-8c engine temperature then dropped back to 96c

Can only assume there was corrison on the relay spade connectors, software does help the testing though..

__________________
2000 2.7 Silver Porsche Boxster

2009 Metallic Blue Alfa Brera

1994 Range Rover... Quivering mass of micro switches
sunseeker is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page