Porsche Headlight Retrofit [from CAD, prototyping to finish)

[BRAN]

Originally Posted by particlewave

Yes, these projectors and litronics both use HID xenon bulbs. Unlike the litronic projectors, these units do function as both high and low beams. They have a cutoff shield that blocks half of the beam until you turn your high beams on, at which point a small solenoid in the projector pulls down the shield to expose the entire beam.

Did you see the pictures on the previous page? I think that even amber headlights look good after retrofitting.

AWESOME look!

Depending on the color of the car, I would say that our amber headlights are sexy and unique looking. Definately NO NEED to de-amber (tail lights are a whole different story )

Now, I exactly know, how I want my headlights to look. Just need someone to 3D-print those and get them chromefinished.

What do you think?

[particlewave]

Originally Posted by BRAN

AWESOME look!

Depending on the color of the car, I would say that our amber headlights are sexy and unique looking. Definately NO NEED to de-amber (tail lights are a whole different story )

Now, I exactly know, how I want my headlights to look. Just need someone to 3D-print those and get them chromefinished.

What do you think?

I'm not sure...doesn't really flow right to me. It's hard to visualize, though.

[BRAN]

Originally Posted by particlewave

I'm not sure...doesn't really flow right to me. It's hard to visualize, though.

yeah, it is difficult.
My personal taste is to "Retro" the look of my "classic" Boxster...a Tribute to the old school 550/356/911 look, with decent (not too tacky ) chrome trims/applications...to give it even more soul

Back (installed):


Side (installed):

18" silver spokes Fuchsfelgen will follow in spring together with
original Aerokit I side skirts (ready to be installed)

Front: Just need to have something up front to keep the balance (photoshoped)...front lights would look fantastic in seal gray, but with eyeliner