DIY Exhaust Mod – Gain of 10+ HP!!!

[tommy583]

Wow that must have been a long bit

[KRAM36]

Originally Posted by tommy583

Wow that must have been a long bit

Wanted to make sure I got far enough into the muffler lol.

Craftsman 1/2 in. Extra-Long Drill Bit - Tools - Power Tool Accessories - Drill Bits

[tommy583]

How long is it? I used a multi bit on a 12 inch extension and had just enough length to drill the hole. Are you saying you went thru the pipe and out the muffler somewhere?

[Nine8Six]

Originally Posted by tommy583

How long is it? I used a multi bit on a 12 inch extension and had just enough length to drill the hole. Are you saying you went thru the pipe and out the muffler somewhere?

Just borrow your wife's 45 magnum mate, does the same trick

A mod done in 0.0023 second

[KRAM36]

Originally Posted by tommy583

How long is it? I used a multi bit on a 12 inch extension and had just enough length to drill the hole. Are you saying you went thru the pipe and out the muffler somewhere?

Yep, I sure did. I was counting the number of times the drill bit would hit metal after cutting after the first opening. I figured 3 times would be it. Didn't realize til afterwords that you actually go under the first pipe in the picture.

I got my 3 hits, right out the backside of the muffler.