Control arm and tie rod options

[LAP1DOUG]

I have the RSS control arms front and rear. At the time, I had heard of some of the castings breaking on GT-3 OEM type control arms, so I was looking for better quality than the originals. The RSS units appear to be machined from a solid billet of aluminum rather than a casting. Probably overkill though.

I have the Stomski rear toe links, which do aid by allowing bump steer adjustment. My measurements indicated that I needed some bump steer in the rear, but not the front. This will be a function of how much you have lowered your car, as the bump steer curves start to change more rapidly toward the limit of suspension arm movement.