Someone took a video of my car this morning on the way to practice at Willow Springs and posted it on Insta. Practice went well and the car is running great. New tires this afternoon and then racing Sat and Sunday.
__________________
GPRPCA Chief Driving Instructor
2008 Boxster S Limited Edition #005
2008 Cayman S Sport - Signal Green
1989 928 S4 5 spd - black
1987 928 S4 - Granite Green Metallic (Felsengrun)
Well, my goals for this weekend were simple: don't crash and avoid major mechanical failure: Mission Accomplished!
With more than 20 Boxster's in the field, it was mighty competitive. In both races, I qualified mid-pack and finished around 14th. Not my best showing by any regard but it was good to simply get through a weekend of racing without any major problems.
Here is a short video of us coming down the Omega. I was chasing the #319 of Erin Vogel who passed me earlier in the race. Despite my best attempts, I was never able to get the position back, but it was really fun!
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
Here is the video from the start of Race #1 on Saturday at Willow Springs.
One of the interesting aspects of this race is that the Green is thrown super early - I am just coming out of Turn 9 (and can't see the start tower) when we go Green and some of the cars behind me are still in the turn!
I make a nice pass to move up one position on the entry to Turn 2 and then defend into Turn 3.
Turn up the sound to hear the glorious symphony of 24 flat-six engines at full throttle and be sure to watch in full screen HD!
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
i gotta say that quiet before the storm and the start is still my favorite part! that sound is so glorious, who cares who wins! when you live that you are ALIVE! that's all that matters.
keep the videos coming and keep enjoin! LIVING THE DREAM!
i gotta say that quiet before the storm and the start is still my favorite part! that sound is so glorious, who cares who wins! when you live that you are ALIVE! that's all that matters.
keep the videos coming and keep enjoin! LIVING THE DREAM!
Thanks and yes, its definitely living a lifelong dream for me.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
[QUOTE=thstone;571162]Here is the video from the start of Race #1 on Saturday at Willow Springs.
One of the interesting aspects of this race is that the Green is thrown super early - I am just coming out of Turn 9 (and can't see the start tower) when we go Green and some of the cars behind me are still in the turn!
Tom, if you look closely you'll see we didn't go green until 37 secs into your video when Anders and I were almost at start finish. It was a very LATE flag. We just decided to get going way before then LOL. You know what they say - go with the cars not with the flag
What really pissed me off was that the one time I was able to get the jump on Anders, Gene was still able to pass us both from the second row by turn 1. Sigh.
Tom, if you look closely you'll see we didn't go green until 37 secs into your video when Anders and I were almost at start finish. It was a very LATE flag. We just decided to get going way before then LOL. You know what they say - go with the cars not with the flag
Whaaaat? I was so far back that by the time I got to the start/finish, you guys were already in Turn 6.
So yes, it appears to be a case of a super late green flag where the entire field jumped early. As you said, I heard everyone else going, so I went too.
Thanks for the clarification!
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
Here are some pics of the prototype rally-style shifter that I printed.
This prototype was made from PLA so its fairly light but feels very strong/stiff. I would like a little more weight so I will print another prototype using thicker exterior walls along with a thicker interior honeycomb structure to see if that gives it a beefier feeling.
I will have to use ABS for the final part since PLA may start to deform at temps (~130F) that are likely to be experienced in a hot race car.
As you can see, it is quite a bit longer/taller than the carbon fiber shifter that I have been using. My initial impression is that I think that it needs to mount deeper on the shift lever like the carbon fiber shifter does.
I am going to drive it a bit like this and see what I think. Then I’ll drill the mounting hole 1” deeper and drive it again. And then drill it so it fits flush at the bottom and drive it again.
The final version can be printed in any of 40 different ABS-available colors. The cost is about $1.65 in material. It takes about 4 hrs to print but its completely automated so I start it and just come back when its done.
Note: My car has the 997 shifter which has a shorter throw than the stock 986/996 shifter, but not as short as an aftermarket short shifter.
And no, you weren't the first to think that it looks like a big blue dild...
Existing carbon fiber shifter...
Prototype shifter...
To give you an idea of the size/dimensions...
Side by side comparison...
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
Been interested in 3D printing, which printer are you using? I was check8ng out some software that you can use your camera to make several photos and convert into a 3D model for printing.
__________________
2000 Boxster S Ocean Blue Metalic
Been interested in 3D printing, which printer are you using? I was check8ng out some software that you can use your camera to make several photos and convert into a 3D model for printing.
Very cool!
I talked to a racer who mentioned that if you want to prevent a money shift
force your shifting pattern to not be Thumb on top, but on the side.
might consider building a shifter that promotes that grip as opposed to the thumbs up.
It has to do with the elbow bending direction, thumbs up it is easy to pull towards you, sideways thumb will make that movement more difficult -- and therefore less likely to be done unintentionally.
I also had issues with a non-rounded top as it dug into my palm.
I am still a novice but its pretty easy to set up/use and thus far has been super reliable. There is a lot of help online in forums but I mostly use the default settings and have had good results.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
I talked to a racer who mentioned that if you want to prevent a money shift
force your shifting pattern to not be Thumb on top, but on the side.
might consider building a shifter that promotes that grip as opposed to the thumbs up.
It has to do with the elbow bending direction, thumbs up it is easy to pull towards you, sideways thumb will make that movement more difficult -- and therefore less likely to be done unintentionally.
I also had issues with a non-rounded top as it dug into my palm.
I'll have to think about the hand positioning - avoiding the money shift is always a good thing!
And yes, I might have to play around with the top edge to find a shape that is comfortable in my palm.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
I am still a novice but its pretty easy to set up/use and thus far has been super reliable. There is a lot of help online in forums but I mostly use the default settings and have had good results.
I was looking at the software just the other day, trying to see how we could apply its use inside our company. I am the IT Manager for this site, we have a engineering design section that might could use this technology. But other than wanting to just print car parts in my office I can not come up with a valid reason for the company to spend the money so I can learn how to use one!
__________________
2000 Boxster S Ocean Blue Metalic
Been busy with work but finally got back to the shifter. The throw length is about right with the knob mounted fully onto the shifter as shown below. I also filed the top edge to give it a more natural feel in my hand.
Planned design changes: deepen the mounting hole, add more chamfer to the top edge, thicken the walls and internal honeycomb for more strength, and add a reinforced boss for a flanged expansion insert/retaining screw. Then I'll print Version 2 in a more appropriate color (white or black) sometime this week.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
\
Linear Mode
