Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster Racing Forum

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-15-2011, 01:57 PM   #12
Registered User
 
Brad Roberts's Avatar
 
Join Date: Aug 2004
Location: Alta Loma, CA
Posts: 1,334
The CaymanS bar will not fit

I have personal "butt" experience with the H&R rear bar, but I do not have numbers in comparison for it. I do know it is stiffer on full soft than the Tarett rear on full stiff. I have taken them out of several of our race cars. Just too stiff for some of the open diff cars.

My biggest issue right now is the rear drop links everyone sells for the rear bars. They are too short. Take a look under a Cayman Interseries car and notice the rear "pry bar" they have going on. The rear links are way way to short for those cars. Everyone sells a replacement heim based drop link for STOCK replacement. Stock replacement is GREAT for STOCK shocks/springs at euro or USA ride height, but when you lower the car, the upper link mounting point goes UP in the chassis!!! and in turn it points the rear bar into the SKY!!

B
Brad Roberts is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page