Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-04-2021, 11:34 AM   #421
Registered User
 
Join Date: Nov 2020
Location: Bay Area
Posts: 5
Garage
Bay Area / East Bay: Lafayette, Moraga, Orinda, Walnut Creek, Concord, Danville, San Ramon, Pleasanton

PorBoys / Joe Zeiph
110 2nd Ave South, C-7
Pacheco, CA 94553 (Concord Airport)
(510) 437-9400

Joe refreshed my 2000 3.2L Boxster S Engine which was suffering from a 5.95 degree camshaft deviation; he replaced a cracked cylinder head, intermediate shaft bearing (IMS), rear main seal (RMS), chain tensioner pads, air oil separator (AOS), clutch, engine and transmission mounts and refreshed the suspension with all new hardware, bushings, shocks and struts. Joe is a dedicated Porsche mechanic that will tackle the most difficult jobs, I highly recommend him.

Fister Sport Exhaust / Darin Fister
150 Middlefield Court, Suite G
Brentwood, California 94513
(925) 308-4370

If you are looking to upgrade your exhaust note, I highly recommend the Fister exhaust. It sounds great and they are located in our back yard. You drop off your current exhaust and they will fabricate the mods and can ceramic coat it too. The turn around is about 4-6 weeks.

I have used all of the above service providers and would highly recommend them all.


Last edited by Calipunter; 06-27-2023 at 09:31 PM.
Calipunter is offline   Reply With Quote
Old 04-17-2021, 01:13 AM   #422
Registered User
 
Join Date: Jan 2021
Location: Long Island NY/ Daytona Beach FL
Posts: 23
Garage
Daytona Beach FL
Autobahn Daytona
2240, 1516 State Ave # I, Holly Hill, FL 32117
(368)-615-7993
Contr_eras is offline   Reply With Quote
Old 06-11-2021, 07:04 PM   #423
Registered User
 
Join Date: Jun 2021
Location: Fairfield, CA
Posts: 1
Quote:
Originally Posted by BoXXter View Post
What about in or near Vallejo, CA
Star Tech European in Vacaville. Great folks, they have worked on my 914 and my Boxster and they do great work at a reasonable price.
Hawkiii is offline   Reply With Quote
Old 07-17-2021, 06:21 AM   #424
Old Car Guy
 
vetman's Avatar
 
Join Date: Jul 2021
Location: Brooklyn, New York
Posts: 58
Any suggestions for a reliable mechanic/service facility in the Middletown/Monticello area of the Catskills in New York? How about Brooklyn, NY?

Ray
98 White/ almost arrived
vetman is offline   Reply With Quote
Old 08-27-2021, 12:27 AM   #425
Registered User
 
Join Date: Apr 2014
Location: New Jersey
Posts: 47
Garage
Porsche Wheel alignment

Hi,

Does anyone know of a place to do a wheel alignment on my 2000 Boxster S in central New Jersey?

Thank you.
__________________
2000 Boxster S (986)
De-snorkeled withK&N Cold Air intake
Short Shifter 14mm spacers F&B
Secondary Cat delete
Top Speed Test pipes and Exhaust
NJBoxster2000 is offline   Reply With Quote
Old 09-03-2021, 04:22 PM   #426
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
Quote:
Originally Posted by NJBoxster2000 View Post
Hi,

Does anyone know of a place to do a wheel alignment on my 2000 Boxster S in central New Jersey?

Thank you.
PowerTech in Rockaway, NJ will do a great job for you if it is "central" enough for you.

https://www.pwr-tech.com/
__________________
Current: 2022 718 Cayman GT4, PDK bone stock (the dark side).
Former: 2003 S, 3.6 LN Nickies, ARP rod bolts, under-drive pulley, Fabspeed sport headers, Softronic tune, 987 airbox 987 motor mount, Function-First Sport motor mount insert, Ben's short shifter, Nine8Six projector headlights & center caps, ROW M030, stainless flexible brake lines, B-K rollbar extension & fire extinguisher mount, hardtop
PaulE is offline   Reply With Quote
Old 10-12-2021, 02:49 PM   #427
Registered User
 
Join Date: Jun 2021
Posts: 93
Woodstock/ milton georgia

Sent from my SM-G991U1 using Tapatalk
alansdavid is offline   Reply With Quote
Old 12-23-2021, 02:33 PM   #428
Registered User
 
Join Date: Aug 2021
Location: SoCal
Posts: 1
LA area Porsche mechanic recommendations?

2005 Boxster base, 47k miles.

Planning to replace clutch and IMS in the next few months.

Would like to compare a few LA area Porsche mechanics.
Price sensitive... not looking for a $6,000 job.
first987 is offline   Reply With Quote
Old 12-24-2021, 04:03 AM   #429
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 3,016
Quote:
Originally Posted by first987 View Post
2005 Boxster base, 47k miles.

Planning to replace clutch and IMS in the next few months.

Would like to compare a few LA area Porsche mechanics.
Price sensitive... not looking for a $6,000 job.
I vetted a few mechanics from the Coachella Valley all the way into Riverside when I needed my Tiptronic rebuilt. Sam runs his own shop... does all the work. Very nice guy.

https://www.specializedporscheservice.com/
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Old 12-29-2021, 07:33 AM   #430
Registered User
 
Join Date: Dec 2020
Location: GA
Posts: 2
Mechanic in Canton, GA

I've been using Precision Motors in Canton- great group of people - reasonable pricing and they've helped me thru several repairs - also fantastic with my daughter's previous Mini Cooper
simplysql is offline   Reply With Quote
Old 03-30-2022, 09:26 AM   #431
1998 Boxster Owner
 
Join Date: Mar 2015
Location: Alviso, CA
Posts: 231
Don Wise Autowerks - San Jose Bay Area , Campbell, CA

https://www.donsautowerks.com/

Indy mechanic is great but always discourages major work to the Boxster since no resale value. Gets annoying after a while so I switched to Don Wise. Don is the man and gets it. He put a lot of emphasis on the driving experience.
Benitom is offline   Reply With Quote
Old 05-06-2022, 03:37 PM   #432
Registered User
 
Join Date: Jun 2021
Posts: 93
Its a shame they say no resale value its just not appreciating fast

Sent from my SM-G991U1 using Tapatalk
alansdavid is offline   Reply With Quote
Old 05-08-2022, 07:25 AM   #433
Registered User
 
Join Date: Mar 2017
Location: Nahcotta
Posts: 320
Portland Oregon area Indie?

Can anyone recommend a good indie?

I am looking at these guys, Matrix Integrated (Westside).

Amy thoughts?

David
Luckyman01 is offline   Reply With Quote
Old 05-20-2022, 09:02 AM   #434
FoFoJoe
 
FoFoJoe's Avatar
 
Join Date: Jan 2018
Location: USA
Posts: 74
Garage
@Luckyman01 I replied to your other thread but just to make sure you see it.

For the Portland, Oregon/Vancouver, Washington area I strongly recommend Unlimited VW.

Back when I lived in Vancouver (up to mid 2021) I took my VW to Mike at Unlimited VW.

https://goo.gl/maps/NqKkN9MxE9hGZHNT7

Google Maps says they're closed permanently, but I'm pretty sure its a mistake because they moved locations in 2020 and I think it's a carry over from the old location. There are reviews from 3 months ago. I would call ahead of time to confirm, and if they are still open they'll probably want to know Google Maps has them listed as closed.

I had Mike and his team swap my water pump, exhaust manifold gaskets, and do some basic diagnostics. Always had an excellent experience from price to service.

It's a family owned business (Mike and his wife, can't remember her name) and I highly recommend them.
__________________
2001 Base 2.7l, 5-speed (124k) - LN IMS kit
- TopSpeedAuto exhaust (headers/mid/muffler)
- 997 Carrera III wheels w/ECS spacers 18x8 +15mm/18x10 +18mm, Eibach springs
- FunctionFirst shift knob/short shift kit
- Focal speakers/Alpine amp/Kenwood deck/Pioneer 8" subs
FoFoJoe is offline   Reply With Quote
Old 07-10-2023, 06:10 PM   #435
Registered User
 
Join Date: Jun 2013
Location: Central Pennsylvania, USA
Posts: 102
Quote:
Originally Posted by embryoguy@mac.com View Post
European Imports in harrisburg, pa


great place. very good prices. changed out my water tank for $100.

Porsche, Volkswagen & Audi Service and Repairs Harrisburg PA
This place has served me well over the past three years. I highly recommend them!
__________________
2000 Boxster S - B.A.D. short shifter and intake plenum - 996 throttle body - Fred's xenon projector headlights - blue LED instrument cluster - and a few other things

Driving this car makes me wish I lived farther away from work!
Troy.Boxster is offline   Reply With Quote
Old 07-16-2023, 04:51 PM   #436
Registered User
 
Join Date: May 2013
Location: Loveland, CO
Posts: 101
Reputable shop near Loveland CO

Looking for reputable shop near Loveland CO???
__________________
:dance:
psquared39 is offline   Reply With Quote
Old 08-10-2023, 12:27 PM   #437
Registered User
 
Join Date: Aug 2023
Location: New Jersey
Posts: 2
Need A Shop Near Bayville / Berkeley Township NJ

Just bought a 1997 Boxster. I live at the shore area in NJ. No immediate issue but am looking for a good shop in the area. Thanks for your help.

Mick
mickster2000 is offline   Reply With Quote
Old 08-13-2023, 10:35 AM   #438
Registered User
 
Peasant 986's Avatar
 
Join Date: Jul 2023
Posts: 2
Quote:
Originally Posted by mylamb View Post
Midwest Eurosport
630-595-5577
http://www.midwesteurosport.com/
104 W Irving Park Rd,
Bensenville, IL 60106

My buddy has a track prep'd 993 and has been going to them for years. They have an excellent reputation in IL. They charge about 2/3 the labor rate of the dealers & parts are comparable. Where you really save money is time - they don't drag out the billable hours like dealers often will. Here are 3 examples of service I had:

30K Service - Dealer quoted $1349. Eurosport did it for $520! (seriously)
Inner & outer CV Boots - Dealer quoted $1400. Eurosport did it for $505.
F&R Brake pads - Dealer wanted $1200. Eurosport did it for $478.

Also, they cleared a CEL for me and when I offered to pay for 1 hour labor, they said don't worry about it. They work on all Porsche's - 924, 914, 944, 968, 964, 993, 986, 997, etc. They understand that not everybody has a GT3 RS and work to accomodate everybody.
Recently picked up my 01 Boxter and had it serviced at Midwest Eurosport.

They found a few things that needed attention while recommending one to watch (prepping the area to monitor) and another that could wait. Gave very detailed info and pictures of everything.

Roy walked me around the car when I picked it up and took the time to answer my questions and give an overall appraisal of the general condition. They even scoped the pistons during my CV boot replacement and didn't charge me.

I will definitely be going back here, very happy with the price and quality of the service.
Peasant 986 is offline   Reply With Quote
Old 11-29-2023, 11:34 AM   #439
Registered User
 
Join Date: Jan 2014
Location: Chevy Chase MD
Posts: 51
engine builder

Hello, Im looking for an engine builder for a 2004 Boxster S engine in the Md, DC, VA area. any reccomendations.

steiner240 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page