Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 06-23-2019, 07:00 PM   #1
Registered User
 
Join Date: Jun 2019
Location: Chantilly Va
Posts: 78
I was going to start a new thread for this question but i will ask it here first. So here in Va its a gorgeous night so I couldn't help myself and took the new to me 986 for a zip around. Wow that little car pulls pretty hard and sounds great! That was the first time that I have tacked her up and she did not disappoint. The top goes up and down with no issues but I am noticing that after I put the top back up and exit the drivers door.....when I shut the drivers door the window hits the outside of the top frame....am I doing something wrong? I can manipulate it a bit and get it to shut within the frame and seal correctly but it would be better to see the window go down 2" when I get out of the car and shut the door.....then go up after I have shut the door....if that makes any sense.
Box7774 is offline   Reply With Quote
Old 06-23-2019, 07:05 PM   #2
Registered User
 
Join Date: Jun 2019
Location: Chantilly Va
Posts: 78
Name:  p9861.jpg
Views: 544
Size:  238.3 KB

checking to see if I can load pics
Box7774 is offline   Reply With Quote
Old 06-23-2019, 07:55 PM   #3
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,448
Quote:
Originally Posted by Box7774 View Post
I was going to start a new thread for this question but i will ask it here first. So here in Va its a gorgeous night so I couldn't help myself and took the new to me 986 for a zip around. Wow that little car pulls pretty hard and sounds great! That was the first time that I have tacked her up and she did not disappoint. The top goes up and down with no issues but I am noticing that after I put the top back up and exit the drivers door.....when I shut the drivers door the window hits the outside of the top frame....am I doing something wrong? I can manipulate it a bit and get it to shut within the frame and seal correctly but it would be better to see the window go down 2" when I get out of the car and shut the door.....then go up after I have shut the door....if that makes any sense.
Very common issue. The window should drop slightly. Do a search on the forum.

Sent from my SM-G970U using Tapatalk
maytag is offline   Reply With Quote
Old 06-23-2019, 08:01 PM   #4
Registered User
 
Join Date: Jun 2019
Location: Chantilly Va
Posts: 78
Ok will do.......I am pretty sure both windows do go down when I go to lower the top....so I assumed that feature was working for when I put the top back up. I will read up and figure it out....thanks
Box7774 is offline   Reply With Quote
Old 06-23-2019, 08:49 PM   #5
Registered User
 
Join Date: Aug 2018
Location: Woodland Wa
Posts: 1,316
Quote:
Originally Posted by Box7774 View Post
Ok will do.......I am pretty sure both windows do go down when I go to lower the top....so I assumed that feature was working for when I put the top back up. I will read up and figure it out....thanks
You mentioned in one of your first few posts that your battery only held 12.3 volts after a 3 hour drive the day before testing.
your thought was that you may have a parasitic draw.

12.3 volts is a 30% charge.
If after driving for three hours you have less then 12.5 volts or higher something is wrong.

A battery that is not charging or holding proper charge can cause all kinds of strange little electrical problems.

May I suggest you make certain the battery is charging and holding sufficient charge before looking to other electrical problems.

Starting with the simplest most basic. (main power source=battery) Then working step by step to the more complex helps reduce the chasing of ones own tail.

Last edited by blue62; 06-23-2019 at 09:20 PM.
blue62 is online now   Reply With Quote
Old 06-24-2019, 05:51 AM   #6
Will there be cake?
 
tonythetiger's Avatar
 
Join Date: Mar 2017
Location: East Coast
Posts: 623
Garage
Quote:
Originally Posted by Box7774 View Post
Ok will do.......I am pretty sure both windows do go down when I go to lower the top....so I assumed that feature was working for when I put the top back up. I will read up and figure it out....thanks
need to replace regulator, 95%.
The window drops slightly when you open door, shuts when closed. The regulator wears and doesn't suck the window down consistently. you can.confirm by pressing down on window when door open and the window is sitting too high for frame, if it moves a little, regulator.
tonythetiger is offline   Reply With Quote
Old 06-24-2019, 06:18 AM   #7
Registered User
 
Join Date: Jun 2019
Location: Chantilly Va
Posts: 78
Looks like my new toy has all of the expected common gizmo issues. Typical for a used car, especially with 158k on the dial. I will spend the morning looking for regulator write ups and vids.....

great forum....

Thanks!!!
Box7774 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page