09-23-2018, 07:07 PM
|
#1
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Are my tires supposed to rotate on the rim?
Hey everyone -
So I've been chasing down this vibration issue, and something I noticed when taking my car to get the rims checked for any dents was that my center caps which I had recently aligned perfectly were now misaligned. So, to double check I used a piece of chalk and marked a straight line on each tire down to the center of the wheel. Much to my surprise, both wheels on my passenger side had rotated almost 360 degrees over the course of a 20 minute drive.
Is this normal? Could this be causing my vibration issue at highway speeds and overly jerky steering on poor roads?
|
|
|
09-23-2018, 07:23 PM
|
#2
|
Who's askin'?
Join Date: Mar 2018
Location: Utah
Posts: 2,446
|
So, you think your tires are spinning on the rim, as opposed to your center caps spinning in the wheel?
Sent from my SM-G930T using Tapatalk
|
|
|
09-23-2018, 07:50 PM
|
#3
|
Certified Boxster Addict
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
|
It is completely normal for a tire to rotate on the rim (to some degree). With that being said, 360 deg in 20 mins seems somewhat excessive.
And yes, this could easily cause an out of balance situation. The wheel and tire are balanced with the tire at a certain location. If the tire was to creep around the rim, then the weight might not be in the correct location in relation to the tire causing an out of balance condition.
A better way to check this is to mark the tire at the location of the valve stem and then check later to see if the mark on the tire has moved in relation to the valve stem.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
|
|
|
09-23-2018, 08:11 PM
|
#4
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Quote:
Originally Posted by maytag
So, you think your tires are spinning on the rim, as opposed to your center caps spinning in the wheel?
Sent from my SM-G930T using Tapatalk
|
I'm pretty certain, but I'll try again tomorrow by marking the valve stem.
|
|
|
09-23-2018, 08:12 PM
|
#5
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Quote:
Originally Posted by thstone
It is completely normal for a tire to rotate on the rim (to some degree). With that being said, 360 deg in 20 mins seems somewhat excessive.
And yes, this could easily cause an out of balance situation. The wheel and tire are balanced with the tire at a certain location. If the tire was to creep around the rim, then the weight might not be in the correct location in relation to the tire causing an out of balance condition.
A better way to check this is to mark the tire at the location of the valve stem and then check later to see if the mark on the tire has moved in relation to the valve stem.
|
Good idea - I'll retest again tomorrow and see if it is still just as bad. What could be causing this? An issue with how the tire was mounted? Or maybe a defect with the rim?
|
|
|
09-23-2018, 08:13 PM
|
#6
|
Who's askin'?
Join Date: Mar 2018
Location: Utah
Posts: 2,446
|
While I won't argue with stone, I would clarify that, while it may happen, it's not supposed to.
In my experience, a tire slipping on a rim is caused by under inflation, combined with aggressive driving.
If a tire has rotated on a wheel, it is no longer balanced.
Sent from my SM-G930T using Tapatalk
|
|
|
09-23-2018, 08:21 PM
|
#7
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Quote:
Originally Posted by maytag
While I won't argue with stone, I would clarify that, while it may happen, it's not supposed to.
In my experience, a tire slipping on a rim is caused by under inflation, combined with aggressive driving.
If a tire has rotated on a wheel, it is no longer balanced.
Sent from my SM-G930T using Tapatalk
|
Tire are at 29 psi in the front and 36 in the rear, cold. My drive today was not aggressive - just from Home Depot back to home, kept her under 4k rpm the whole time.
|
|
|
09-23-2018, 11:01 PM
|
#8
|
Registered User
Join Date: Jul 2017
Location: SoCal
Posts: 118
|
wow! tire should not slip or move around the wheels/rim. Like other mentioned if too low tire pressure and aggressive driving will make that happen. But with 29psi and just driving on local street, tire should not slip from the rim.
|
|
|
09-24-2018, 05:36 AM
|
#9
|
Registered User
Join Date: Dec 2016
Location: Clifton, NJ
Posts: 1,135
|
With a clean rough bead and proper mounting a tire should not move on the rim under normal driving. Drag race cars have this issue on hard launches but thats with 500+ hp and sticky rubber
|
|
|
09-24-2018, 05:44 AM
|
#10
|
Who's askin'?
Join Date: Mar 2018
Location: Utah
Posts: 2,446
|
Quote:
Originally Posted by Quadcammer
With a clean rough bead and proper mounting a tire should not move on the rim under normal driving. Drag race cars have this issue on hard launches but thats with 500+ hp and sticky rubber
|
Drag race cars with 500hp don't have this problem any longer, hehe. We used to have this problem, when we were using bias ply tires. But with the advent of drag radials, it takes a lot more than 500hp to spin the tire on the rim.
Offroad / rock crawlers have this problem a ton, because they air down to 8-12psi. That's why they have what's called a "beadlock" on them.... because they don't want tires spinning on the wheel either.
Again: if your tires are slipping on the wheel, this should be corrected.
Sent from my SM-G930T using Tapatalk
|
|
|
09-24-2018, 08:23 AM
|
#11
|
Registered User
Join Date: Nov 2006
Location: In the garage...
Posts: 1,713
|
Quote:
Originally Posted by thstone
It is completely normal for a tire to rotate on the rim (to some degree). With that being said, 360 deg in 20 mins seems somewhat excessive.
|
Yep - agree 100%.
Always chuckled when I ran Toyo Proxy R888s and how much they moved around a rim... particularly rear. I'd index when mounting new and see how quickly I could get one to rotate 360 degrees around...
__________________
"Cool Prius!" - Nobody
|
|
|
09-24-2018, 08:52 AM
|
#12
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Quote:
Originally Posted by ndfrigi
wow! tire should not slip or move around the wheels/rim. Like other mentioned if too low tire pressure and aggressive driving will make that happen. But with 29psi and just driving on local street, tire should not slip from the rim.
|
God, I hope this solves my vibration issue... it has been driving me absolutely insane.
|
|
|
09-24-2018, 08:53 AM
|
#13
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Quote:
Originally Posted by Burg Boxster
Yep - agree 100%.
Always chuckled when I ran Toyo Proxy R888s and how much they moved around a rim... particularly rear. I'd index when mounting new and see how quickly I could get one to rotate 360 degrees around...
|
I'm guessing it took you more than 20 minutes?
|
|
|
09-24-2018, 09:43 AM
|
#14
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Quote:
Originally Posted by maytag
Drag race cars with 500hp don't have this problem any longer, hehe. We used to have this problem, when we were using bias ply tires. But with the advent of drag radials, it takes a lot more than 500hp to spin the tire on the rim.
Offroad / rock crawlers have this problem a ton, because they air down to 8-12psi. That's why they have what's called a "beadlock" on them.... because they don't want tires spinning on the wheel either.
Again: if your tires are slipping on the wheel, this should be corrected.
Sent from my SM-G930T using Tapatalk
|
While I love the idea of my car having 500+ hp, I'm gonna guess that is not the case... I'll get this looked at. Thanks!
|
|
|
09-24-2018, 10:28 AM
|
#15
|
Registered User
Join Date: May 2016
Location: Northern Indiana
Posts: 410
|
Quote:
Originally Posted by speedyspaghetti
God, I hope this solves my vibration issue... it has been driving me absolutely insane.
|
I believe this was suggested in your other thread, but I would recommend seeing if you can find someone/someplace that would let you briefly borrow a set of replacement wheels (for at least your fronts) to confirm that your vibration issue lies with either your rims or tires.
And for the record, I'd have never guessed that your tires were spinning on the rims. Good catch...
|
|
|
09-25-2018, 01:12 PM
|
#16
|
Registered User
Join Date: Sep 2012
Location: Greenville, SC
Posts: 43
|
I seriously doubt yours tires are rotating on the rim. I've never heard of it and I've been around cars and tires a long time.
__________________
2003 Boxster 986 2.7 (Bought back my old car!)
2013 Boxster 981 2.7 Sold
2007 Carrera 997 3.6 Sold
2003 Boxster 986 2.7 Sold
1999 Boxster 986 2.5 Sold
|
|
|
09-25-2018, 02:01 PM
|
#17
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,164
|
Quote:
Originally Posted by Jim 'n' SC
I seriously doubt yours tires are rotating on the rim. I've never heard of it and I've been around cars and tires a long time.
|
It does happen.
If he chalked them, it's kind of hard to mistake.
|
|
|
09-25-2018, 02:17 PM
|
#18
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Quote:
Originally Posted by Jim 'n' SC
I seriously doubt yours tires are rotating on the rim. I've never heard of it and I've been around cars and tires a long time.
|
I found it hard to believe too, but I cannot think of any other reason why the chalk marks would be moving.
|
|
|
09-25-2018, 02:39 PM
|
#19
|
Registered User
Join Date: Jun 2018
Location: Raleigh, NC
Posts: 9
|
Are you saying you put a continuous line of chalk on both the tire and the wheel, and after driving some distance the chalk line "split" into two lines on the same tire/wheel?
Or are you saying you marked lines on your front and rear tires, and after driving they are no longer aligned in the same direction? This instance, along with center caps, are impossible to keep aligned from front to rear because your front and rear tires are different sizes. And they won't stay aligned passenger side to driver side, because when you make a turn the outside wheels turn more than the inside wheels.
But if it's the first case, where the single line on one tire/wheel splits into two, that's freakin weird man.
__________________
98 Porsche Boxster, silver, 2.5 / 67 Karmann Ghia, black, 1500sp SOLD! / 98 BMW Z3, 2.8 inline 6, atlanta blue metallic SOLD! / 75 Porsche 914, 2270 type4, laguna blue SOLD! / 72 Porsche 914, 1.7 type 4, signal orange SOLD! / 74 Karmann Ghia, 1600dp, black SOLD! / 74 Triumph TR6, 2.5 inline 6, sapphire blue SOLD!
|
|
|
09-26-2018, 07:48 AM
|
#20
|
Registered User
Join Date: Nov 2017
Location: Los Gatos, CA
Posts: 173
|
Quote:
Originally Posted by Era Vulgaris
Are you saying you put a continuous line of chalk on both the tire and the wheel, and after driving some distance the chalk line "split" into two lines on the same tire/wheel?
Or are you saying you marked lines on your front and rear tires, and after driving they are no longer aligned in the same direction? This instance, along with center caps, are impossible to keep aligned from front to rear because your front and rear tires are different sizes. And they won't stay aligned passenger side to driver side, because when you make a turn the outside wheels turn more than the inside wheels.
But if it's the first case, where the single line on one tire/wheel splits into two, that's freakin weird man.
|
You know, I think I need to re-do my test. I had some doubts while I was falling asleep last night and this morning I checked and my center caps are a bit loose on that side compared to the other. I'll re-check tonight and report back.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 12:13 PM.
| |