Assessing Rear Axle Rubber Boot

[NewArt]

You can certainly DIY. I have replaced the boots on 2 cars, one a tip and the other a 6 speed. The parts are cheap, it's mostly a labour intensive job. Be prepared to get dirty and make sure you have everything that you need before starting. You don't need to remove the complete axle, just the inner flange. However, if you do decide to remove the axles, it will be easier to work on.

[Ciao]

Originally Posted by NewArt

You can certainly DIY. I have replaced the boots on 2 cars, one a tip and the other a 6 speed. The parts are cheap, it's mostly a labour intensive job. Be prepared to get dirty and make sure you have everything that you need before starting. You don't need to remove the complete axle, just the inner flange. However, if you do decide to remove the axles, it will be easier to work on.

Hmmm. What do I need in terms of tools?

[NewArt]

Originally Posted by Ciao

Hmmm. What do I need in terms of tools?

socket set with extension bars. Allen or Torx socket for flange bolts, end nipper pliers or special clamp tool for the boot clamps. A c-clip pliers. Torque wrench.

[Meir]

Originally Posted by NewArt

socket set with extension bars. Allen or Torx socket for flange bolts, end nipper pliers or special clamp tool for the boot clamps. A c-clip pliers. Torque wrench.

and if you decide to remove the axle from the car and work on the bench, you will need a 32mm socket and a big ass torque wrench.
ho. and you will need to buy a new nut as well.

[Ciao]

Originally Posted by Meir

and if you decide to remove the axle from the car and work on the bench, you will need a 32mm socket and a big ass torque wrench.
ho. and you will need to buy a new nut as well.

Got that, except for a new nut