Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-06-2017, 04:36 PM   #12
Registered User
 
Join Date: Mar 2017
Location: Los Angeles
Posts: 356
I ordered the parts from Pelican today and a flex 10mm socket, which seems to be the trick for those pesky water pump bolts.

I did clean out the radiators today.
They look like that had never been done, or at least not in a long, long time.
But, the driver side air dam disintegrated when I unbolted it - cracked down the middle.
Not completely in half, so I should be able to salvage it for a little while as I proceed along to see what's going on. The plastic mush have been so dry and brittle from all those miles a few inches off the road in the hot dry air that it just gave way.

Pretty minor, all things considered.

One question, depending on what I find with the water pump (shot bearing is what I'm thinking) do I want to flush the car with a garden hose and tap water or fill it with distilled water completely, run it, drain it, and then put in the 50/50 mix?

I'm holding good thoughts on this working out.

Last edited by robdelorenzo; 09-06-2017 at 04:38 PM.
robdelorenzo is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page