Replace a double row IMS at clutch time?

[sfkjeld]

Went ahead with the LN IMS Pro. Turned out that despite the VIN number indicating otherwise, the motor had the single row bearing in it anyway. Bad news, wound up needing a flywheel. The flywheel was about $500 and the clutch kit was $650. Hoses, fork, RMS added a few hundred more. Is 10 hours labor about right?

[paulofto]

Originally Posted by sfkjeld

Went ahead with the LN IMS Pro. Turned out that despite the VIN number indicating otherwise, the motor had the single row bearing in it anyway. Bad news, wound up needing a flywheel. The flywheel was about $500 and the clutch kit was $650. Hoses, fork, RMS added a few hundred more. Is 10 hours labor about right?

My whole job too 11 but they also did a brake and clutch fluid change that added an hour. 10 hours seems right.