Boxster Aero Kit....W.I.P.

[Joe toth]

I've had the 986 for three weeks and the splitter for my aero package is complete. Next up is a redesign and tooling of my 987 side skirts. Then start on the back end with a diffuser. At some point I'm going to hang some parachutes off the side of the car and call them intake scoops. I'm also thinking about doing something for the rear spoiler, it seems like it needs to grow a bit more than what is there currently. "Go big or go home"....LOL.






Here is a picture of my 987 side skirts I have to retool to fit properly.

[Mark_T]

To each his own, I suppose...

[Joe toth]

Decided to forgo the side skirts for a while and work on the back of the car as the next piece....sort of a front to rear balance.
Working on a duck tail for the Boxster. Here are a few pictures of what I have come up with thus far. Input as to size and shape would be welcome.
Thanks

[rfuerst911sc]

In my opinion the ducktail should be half the height you have in the pics. I will speak for myself I have wanted a ducktail to mount onto the OEM spoiler but I want something smaller so it looks good in the down or up position.

[Joe toth]

Vertically it is 3-1/4" and horizontal is 6". Are you thinking shorten both dimensions? It is/will mount as per the factory part.
Thank you for the input.

[DWBOX2000]

I think the duck is perfect. Where did you get that?

[Joe toth]

I am in the process of making the mold and producing them.

[thstone]

First, kudos for doing this! Great job.

I like them both. The duck tail is the right size IMHO.

[Nine8Six]

Its actually quite nice what you did. When you look at it from the side those are certainly the best flow curves I've seen for a Boxster spoiler. Nice work/skills man

Wish I'd be at least half-able to do these sort of things, not all that easy to do

[Van914]

Looks great as it is!

[Deadeye]

Are you making front splitters and are they for sale?

[Joe toth]

deadeye, yes sir i am making the splitters and are for sale. First pictures in the thread is my splitter I did white on my car but they are produced in black gel coat/fiberglass. Take a look at my facebook page "Joe Toth Composites" for more pictures and some of the other stuff I do.

[rfuerst911sc]

Originally Posted by Joe toth

Vertically it is 3-1/4" and horizontal is 6". Are you thinking shorten both dimensions? It is/will mount as per the factory part.
Thank you for the input.

Can you snap a few different angle pics with the spoiler raised ? To my eye you did very good with the shape but it looks too tall to me..........maybe I'm wrong .

[Joe toth]

I will take some pictures tomorrow and post. There are a couple of people who like it as is but I am leaning towards cutting it down. It didn't look as big on the bench while I was forming it. More than likely I will end up with two different sizes and two molds.

[Joe toth]

Here are a few more pictures of the duck tail raised....hope this helps.

[Fintro11]

I like it! Let me know when the spoiler will be available

[pony13ca]

Originally Posted by Fintro11

I like it! Let me know when the spoiler will be available

+1 Count me in for one.

[Joe toth]

Spoiler.....you talking front or rear duck tail. The front spoiler/splitter is ready to go now.

[DWBOX2000]

Duck, put me down for one too when ready.

[Yellow986S]

I love the rear ducktail. However, I would appreciate it if you could make a second mold that is about half the size of the current ducktail in height and have the sides blend with it.

Should look perfect and then you can count me in to buy one.

Could you also do it in carbon fiber or carbon fiber overlay?