Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 12-28-2015, 06:23 AM   #1
Registered User
 
mustang2porsche's Avatar
 
Join Date: Aug 2013
Location: Louisiana
Posts: 108
engine died while driving, won't turn over.

Been a while since I've been on here since this boxster was being good. But all of a sudden while driving and coming to a stop my engine just dies and won't even make a sound to turn over. Start makes A Tick sound and that's it. So while being honked at saw a puddle under my car, couldn't tell if it was oil or not. But tried to start her several times and all I got was a tick like my engine seized.... any ideas? Car hot pushed to a taco bell til I can get to it.

mustang2porsche is offline   Reply With Quote
Old 12-28-2015, 06:32 AM   #2
Registered User
 
Join Date: Oct 2014
Location: Georgia
Posts: 391
I assume the cars battery is in good condition and simply not dead? Does the starter try to engage? Try and identify what the puddle is before trying to start it, if it is oil then could be IMS bearing cap backed out? Make any funny noises when it died?
__________________
John or J.J. - But I answer to most anything~
*2000 Honda Accord 4DR V6 - 220K*
http://986forum.com/forums/show-tell-gallery/54328-boxsterls376-introduction-ls3-conversion.html
BoxsterLS376 is offline   Reply With Quote
Old 12-28-2015, 06:33 AM   #3
Registered User
 
Swhitcomb's Avatar
 
Join Date: Dec 2013
Location: Ranson wv
Posts: 237
That's an expensive description. Doesn't sound good.
__________________
02 Boxster
71 VW Karmann Ghia
71 VW Super Beetle
Swhitcomb is offline   Reply With Quote
Old 12-28-2015, 06:39 AM   #4
Registered User
 
stelan's Avatar
 
Join Date: Oct 2015
Location: Austin
Posts: 395
Sounds like a dead engine
stelan is offline   Reply With Quote
Old 12-28-2015, 06:54 AM   #5
Registered User
 
mustang2porsche's Avatar
 
Join Date: Aug 2013
Location: Louisiana
Posts: 108
No funny noises just dead. When I did get to taco bell I did get under and found oil on what I think is the bell housing or back of the engine. Oh before it died while I was spirited driving I start to notice it would take a second our two to make some torque. Like turbo laggish.
mustang2porsche is offline   Reply With Quote
Old 12-28-2015, 07:24 AM   #6
01101
 
Join Date: Jul 2015
Location: CT
Posts: 587
Was it smoking?
alm001 is offline   Reply With Quote
Old 12-28-2015, 07:32 AM   #7
There Is No Substitute.
 
rick3000's Avatar
 
Join Date: May 2007
Location: West Coast
Posts: 3,253
Garage
I would have said a bad CPS sensor, but a puddle of oil indicates RMS or IMS failure to me. What year is your 986? How many miles on it? Did you notice any oil drip beforehand?

If it wasn't oil, it is probably something less serious. Honestly, it is impossible to diagnosis something like this online, have the car towed by flatbed to a good mechanic. Good luck!
__________________
1999 Ocean Blue Metallic Boxster - blueboxster.com
rick3000 is offline   Reply With Quote
Old 12-28-2015, 07:40 AM   #8
Registered User
 
mustang2porsche's Avatar
 
Join Date: Aug 2013
Location: Louisiana
Posts: 108
2002 2.7l base. Never burnt oil and just turned 178,000. Going to tow it home so I can look at it better. If not flatbed it to an indie
mustang2porsche is offline   Reply With Quote
Old 12-28-2015, 07:47 AM   #9
I am my own mechanic....
 
Timco's Avatar
 
Join Date: Feb 2013
Location: Salt Lake City, UT
Posts: 3,432
Was the puddle from your car? What fluid was it?
__________________
'04 Boxster S 50 Jahre 550 Spyder Anniversary Special Edition, 851 of 1953, 6-sp, IMS/RMS, GT Metallic silver, cocoa brown leather SOLD to member Broken Linkage.
'08 VW Touareg T-3 wife's car
'13 F150 Super Crew long bed 4x4 w/ Ego Boost
Timco is offline   Reply With Quote
Old 12-28-2015, 07:49 AM   #10
Registered User
 
mustang2porsche's Avatar
 
Join Date: Aug 2013
Location: Louisiana
Posts: 108
Quote:
Originally Posted by Timco View Post
Was the puddle from your car? What fluid was it?
Couldn't tell exactly. It was in the middle of a turning and so I couldn't go back to see.
mustang2porsche is offline   Reply With Quote
Old 12-28-2015, 07:52 AM   #11
Registered User
 
Retroman1969's Avatar
 
Join Date: May 2013
Location: Oklahoma City
Posts: 856
I'm no expert, and really hope that I'm wrong, but I've read a lot about this issue over the years, and it sounds like a textbook description of an IMS failure.
They can go without warning, without noise, and over half the people I've heard about that had the failure had it when they were stopped or coming to a stop.
178,000 is pretty mature for any car, but especially one of these.

Best of luck on this. I hope it turns out to be something trivial.
__________________
"Remember, I'm pulling for ya! We're all in this together."

Last edited by Retroman1969; 12-28-2015 at 07:55 AM.
Retroman1969 is offline   Reply With Quote
Old 12-28-2015, 08:22 AM   #12
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
  • All three of my engine failures happened without any strange noises
  • Two of the three failures the engine would not turn over after they stopped running
  • Two of the three failures had a reduction in power for about 10-20 seconds before the engine stopped running
  • Two of the three failures had a puddle of oil under the car
  • None of the failures were due to IMS bearing failure (two failures caused by lifters and one by crank bearing)
  • There are ~30 ways that a Boxster engine can fail
  • 178,000 miles is a lot of miles
Like Retroman, I hope that I'm completely wrong, but you can see where I'm going with this....
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor

Last edited by thstone; 12-28-2015 at 08:27 AM.
thstone is offline   Reply With Quote
Old 12-28-2015, 08:39 AM   #13
Registered User
 
mustang2porsche's Avatar
 
Join Date: Aug 2013
Location: Louisiana
Posts: 108
Quote:
Originally Posted by thstone View Post
  • All three of my engine failures happened without any strange noises
  • Two of the three failures the engine would not turn over after they stopped running
  • Two of the three failures had a reduction in power for about 10-20 seconds before the engine stopped running
  • Two of the three failures had a puddle of oil under the car
  • None of the failures were due to IMS bearing failure (two failures caused by lifters and one by crank bearing)
  • There are ~30 ways that a Boxster engine can fail
  • 178,000 miles is a lot of miles
Like Retroman, I hope that I'm completely wrong, but you can see where I'm going with this....
Sounds about right. Either way I regret buying this car since I bought it. Do Imma Part With It
And buy another S like I intended. But it was nice knowing how a base felt to drive. Sigh. Anyone know a good price to sell for?
mustang2porsche is offline   Reply With Quote
Old 12-28-2015, 09:41 AM   #14
Registered User
 
Join Date: Nov 2013
Location: Emerald City
Posts: 885
Garage
Quote:
Originally Posted by mustang2porsche View Post
Sounds about right. Either way I regret buying this car since I bought it. Do Imma Part With It
And buy another S like I intended. But it was nice knowing how a base felt to drive. Sigh. Anyone know a good price to sell for?
If the motor is bricked, expect 2500-3000
jdraupp is offline   Reply With Quote
Old 12-28-2015, 09:49 AM   #15
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,796
Garage
Quote:
Originally Posted by mustang2porsche View Post
Sounds about right. Either way I regret buying this car since I bought it. Do Imma Part With It
And buy another S like I intended. But it was nice knowing how a base felt to drive. Sigh. Anyone know a good price to sell for?
you regret buying the car, or was that a typo?
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Old 12-28-2015, 10:01 AM   #16
Registered User
 
mustang2porsche's Avatar
 
Join Date: Aug 2013
Location: Louisiana
Posts: 108
Quote:
Originally Posted by JayG View Post
you regret buying the car, or was that a typo?
Yeah this particular boxster. Had it for 9 months and regret it. Mostly because it was a base, five speed, and not as nice as my former 01 S. I "settled" because I wanted a boxster and in the meantime save for a 911 or 981. But I'll part with this one a buy another, but a boxster S Instead.

Edit. This was my third boxster and the first that had engine failure.

Last edited by mustang2porsche; 12-28-2015 at 10:05 AM.
mustang2porsche is offline   Reply With Quote
Old 12-28-2015, 10:56 AM   #17
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Be sure to confirm that the engine is toast. Symptoms can be deceiving.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 12-28-2015, 11:27 AM   #18
Registered User
 
mustang2porsche's Avatar
 
Join Date: Aug 2013
Location: Louisiana
Posts: 108
Update. With luck the engine started when I went to go get it. And while I drove it back it sounded like a f ' ed up washing machine with the engine cover off.. so... time to sell.

Edit: I'm checking to see exactly where the sound coming from and it seems that there's two sounds. One sounds like something is grinding on the passanger side near where the engine meets the transmission. Then the ticking/knocking sound is also coming from the same area but in the cylinder head. I think cylinder 3 I'm guessing.

Last edited by mustang2porsche; 12-28-2015 at 12:21 PM.
mustang2porsche is offline   Reply With Quote
Old 12-28-2015, 12:15 PM   #19
Registered User
 
Join Date: Oct 2014
Location: Georgia
Posts: 391
yeah sounds like the bolts backed out on the IMS cover and/or the bearing failed jumped time etc... either way it sounds like you know what to do...

For what it's worth if you are a handy person a motor swap is not that hard in these cars so you may be able to get a cheap motor and throw it in to make it a running car again, but with 178K on the clock may not be worth it...

Best way to get the most out of it is to part it, like someone mentioned otherwise it is worth about $2k.
__________________
John or J.J. - But I answer to most anything~
*2000 Honda Accord 4DR V6 - 220K*
http://986forum.com/forums/show-tell-gallery/54328-boxsterls376-introduction-ls3-conversion.html
BoxsterLS376 is offline   Reply With Quote
Old 12-28-2015, 12:23 PM   #20
Registered User
 
mustang2porsche's Avatar
 
Join Date: Aug 2013
Location: Louisiana
Posts: 108
Quote:
Originally Posted by BoxsterLS376 View Post
yeah sounds like the bolts backed out on the IMS cover and/or the bearing failed jumped time etc... either way it sounds like you know what to do...

For what it's worth if you are a handy person a motor swap is not that hard in these cars so you may be able to get a cheap motor and throw it in to make it a running car again, but with 178K on the clock may not be worth it...

Best way to get the most out of it is to part it, like someone mentioned otherwise it is worth about $2k.
As much as I would love to motor swap. This isn't the car to do so. I would be better off selling and getting another S. Like I had prior.

mustang2porsche is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page