Fabspeed jack point

[WillH]

Originally Posted by Timco

...

I wish mine was that clean!!!!!!

Me too.
Doing the engine mount and trying to figure out if the water pump is original to the car.
I would prefer a central jack point in the rear and that Fabspeed piece might be it. It would prevent the damage you described from jacking there.

[Timco]

Originally Posted by WillH

Me too.
Doing the engine mount and trying to figure out if the water pump is original to the car.
I would prefer a central jack point in the rear and that Fabspeed piece might be it. It would prevent the damage you described from jacking there.

You should be able to follow the metal gasket to see if it's been cut before. You have to cut the old one off the next part over then cut the new gasket. Mine had 130k miles and was not new when I swapped it. They used non Porsche. I used Porsche.

[WillH]

Hard to tell with the hoses still hooked up but from what I can see it does not appear to cut.

[healthservices]

mine is all dented up from jacking there. and I use a block of wood too.

[Pdwight]

Having just had all this "stuff" off doing a bearing job that particular spot does not look like it would support the weight of the car ??

[WillH]

Originally Posted by Pdwight

Having just had all this "stuff" off doing a bearing job that particular spot does not look like it would support the weight of the car ??

That was my thought. Guess it's too new. No-one to sing its praises or state that it's causing damage lifting from there...

[healthservices]

That's news to me, this is my fifth of these and I lifted all by that point. but like I said I use a block of wood there.