Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 07-12-2014, 05:12 PM   #1
Registered User
 
Join Date: Jul 2011
Location: Pennsylvania
Posts: 19
Angry Computer under driver's seat

I have a 2002 Boxster, non-S, 61k miles. Some days ago, I had some strange electrical problems. At first, I thought it was the ignition switch. But when I noticed water on the driver's side floor, and investigated related posts about bizarre electrical issues, I fear the computer under the driver's seat (that evidently prevents theft), got wet due to a clogged drain. The electrical problems are as follows:
  • Windows won't go down.
  • Won't start/turn over when the key is turned. (Dash lights and instruments come on, but nothing else happens. No clicking sound).
  • Front trunk won't open when the button is pushed (rear trunk will open, and right now, it does so when the key is turned in the ignition when I try to start it.)
  • Horn honks twice every 30 seconds or so.

My plan is to take out the driver's seat, dry everything out and say a few prayers that I the computer isn't dead. My questions:
  • Since the front trunk won't open, I can't disconnect the battery without getting access the hard way: cable near the right or left headlight from inside the wheel well. Can I simply do this without the key in the ignition, or should I take the trouble to disconnect the battery?
  • What is the exact name of this particular unit, in the event I have to find a replacement?

Thanks in advance, as always.

Roland3337


Last edited by roland3337; 07-12-2014 at 05:15 PM. Reason: Added info about my car.
roland3337 is offline   Reply With Quote
Old 07-12-2014, 05:16 PM   #2
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
It's the immobilizer, and I would take the time to get the front hood open to disconnect the battery.

Also stop energizing it since it may cause more damage each time you try.
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 07-12-2014, 05:33 PM   #3
Registered User
 
thom4782's Avatar
 
Join Date: Sep 2010
Location: Foster City CA
Posts: 1,099
If you can't fix it, give these guys a call...Specialized ECU Repair, Replacement, & Testing - Restore or Exchange your Electronic Control Unit (ECU). Others have said good things about them. Cost to repair the Immobilizer is about 1/3 the price of the part new.
thom4782 is offline   Reply With Quote
Old 07-12-2014, 07:42 PM   #4
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Roland, just so you know, the immobilizer (also called the Central Locking Unit or CLU) is coded to match the transmitter in the key fob and the ECU in the rear trunk. All three must have the same code or the car won't start.

Unfortunately, only a dealer (and a few rare indy repair shops) have the Porsche test equipment to re-program any of these components (key fob, CLU, or ECU).

You can buy a replacement CLU on eBay but you'll probably have to get the car (and new CLU) to the dealer so it can be re-programmed to match your existing key fob and ECU.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 07-13-2014, 05:17 AM   #5
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
And you must have the learning code (password) for the replacement immobilizer. Dealers can look it up using the VIN of the donor car.
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 07-13-2014, 05:47 AM   #6
Registered User
 
Join Date: Jul 2011
Location: Pennsylvania
Posts: 19
I'd heard about the need to reprogram everything at a dealer. Any guesses about how much $$$ this is going to cost me?
roland3337 is offline   Reply With Quote
Old 07-13-2014, 06:11 AM   #7
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
Worse case you will need new key remotes, a CLU, and programming. If the dealer can read your existing CLU's key codes, key remotes will not be needed.
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 07-13-2014, 11:56 AM   #8
Registered User
 
Join Date: Jul 2011
Location: Pennsylvania
Posts: 19
Unhappy Have to replace the immobilizer...

I managed to get the seat out, along with the immobilizer. Really wasn't that difficult with the right tools.Unfortunately, the immobilizer itself looks toasted. The circuit board near the black 12 pin socket was charred and the copper foil bubbling up. I will need to send it in to Specialized ECU Repair. They will also need the ECU itself, which I think is in the rear trunk. But since I have the immobilizer out, I need to find a way to manually pop that rear trunk so I can get at it. That will be quite a trick without any power.
roland3337 is offline   Reply With Quote
Old 07-13-2014, 12:24 PM   #9
Registered User
 
thom4782's Avatar
 
Join Date: Sep 2010
Location: Foster City CA
Posts: 1,099
There is an emergency release cable for the rear trunk. It located in the rear driver-side wheel well. If you search the forum, you'll likely find a DIY on it.
thom4782 is offline   Reply With Quote
Old 07-13-2014, 12:54 PM   #10
Registered User
 
Miata2Boxster's Avatar
 
Join Date: Jun 2014
Location: Santa Fe, NM
Posts: 69
Quote:
Originally Posted by Paul View Post
Worse case you will need new key remotes, a CLU, and programming. If the dealer can read your existing CLU's key codes, key remotes will not be needed.
This is the scenario I am looking at now. What is the approximate cost of the above from the dealership including new remote keys...mine are shot.? thanks
__________________
2001 Forest Green Metallic Boxster with Porsche Sport Exhaust.

Last edited by Miata2Boxster; 07-13-2014 at 12:57 PM.
Miata2Boxster is offline   Reply With Quote
Old 07-13-2014, 02:16 PM   #11
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
Your keys are fine, the issue is the only source for their passwords is your immobilizer. Hopefully it is in good enough shape that they can be downloaded to a PST-2. If you were closer I could do this for you.
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 07-16-2014, 02:39 PM   #12
Registered User
 
Join Date: Jul 2011
Location: Pennsylvania
Posts: 19
Got the job done...

Thanks, guys. I managed to get the immobilizer out, and I also managed to the trunk and extract the ECU, though my electric trunk release wasn't working. Because of some clear directions about removing the rear bumper, etc., I've got everything that I need to send off the electronic components for repair, so I can get my old friend on the road again inside a week, at a reasonable cost. You guys saved me probably $2000-2500.

roland3337 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page