Wheel size question - 2001 Porsche Boxster Base

[amitmishra4]

Thanks thstone!! That is interesting information.

Well lkchris, I thought the manual would have generic information since they don't write different manuals for different variants within a year unless it's something drastically different.

But I took a tape measure to the wheels this morning and measuring inside the lips(not including them), it's 17".

[Miata2Boxster]

Originally Posted by amitmishra4

Thanks thstone!! That is interesting information.

Well lkchris, I thought the manual would have generic information since they don't write different manuals for different variants within a year unless it's something drastically different.

But I took a tape measure to the wheels this morning and measuring inside the lips(not including them), it's 17".

My 2001 base arrived to me with 3 piece 18" aftermarket wheels. They have more bling but I think the ride suffers a bit as a result. 17" wheels is the sweet spot for me.. On my list of things to switch.

[edc]

Originally Posted by amitmishra4

Thanks thstone!! That is interesting information.

Well lkchris, I thought the manual would have generic information since they don't write different manuals for different variants within a year unless it's something drastically different.

But I took a tape measure to the wheels this morning and measuring inside the lips(not including them), it's 17".

I'm trying to get my head round why you measured the wheel when the information is stamped on the sidewall of the tyre?

[amitmishra4]

Originally Posted by edc

I'm trying to get my head round why you measured the wheel when the information is stamped on the sidewall of the tyre?

Edc,
Just me being over paranoid. I've ordered things in haste before and realized I should have done some basic due dilligence to understand and measure parts before placing an order. I realize now it is probably not possible (theoretically) to install a tire of a different diameter on the wheel. I had bought a used Suzuki Esteem when I was in school for $1000 and I can't remember the specifics now but the previous owner had mounted a mismatched tire on one of the rears that wasn't meant for the rim and though the tire was good, I had to replace it. Only added to my paranoia this time around.

Thanks Paul, rdass623, thstone for your advice,
For reference, I ended up purchasing a set of Cooper Zeon RS3-a's from discount tire. Cost under $400 with new valve stems included and there was a $140 rebate on them too. As far as brake pads/rotors, after a lot of debate, I ended up biting the bullet on a brake motive set of cross drilled and slotted rotors and ceramic pads all aroundfor $211 shipped. Read a lot about them on many forums and the general consensus was good. There are several boxster owners using them as well. Brake warehouse had a good deal on a set of Centric C-Tek blank rotors and ceramic pads for $263 shipped home as well. Plan to do the rotor and brake install myself but I will end up taking the tires to a shop to get professionally mounted, balanced and get a laser wheel alignment too.

Do people on here do their own tire changes on their cars?

[Top_Ramen]

Originally Posted by amitmishra4

Do people on here do their own tire changes on their cars?

I usually do if I have the permission to. A close friend of mine that still manages a Goodyear that I once worked at usually lets me do my own. It's not as much as mounting the tire I'm worried about (unless there a tpms sensor), it's the balancing of the wheel that I'd much rather do myself.

[Slate 01]

If I currently have 255/40/17 on the rear with original Porsche rims, can I increase the width anymore? Wider is always better looking as far as I am concerned, but I don't want to change wider aftermarket rims. Any suggestions? I'm running 225/45/17 on front btw.

Thanks guys for anticipated input