Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-14-2014, 05:16 AM   #1
Registered User
 
evo-r's Avatar
 
Join Date: Mar 2013
Location: Long Island, NY
Posts: 378
Question 2003 Boxster doesn't corner as good as 2011 Golf TDI?

Ever since I purchased my 2003 base 986 a year ago, I've noticed whenever I cornered hard I feel the car is "floaty". I know the shocks/springs are good and I need to replace the trailing arm (track arm) due to clicking noise on rough road at low speed, but does anyone know if trailing arm, control arm, drop link, other bushings... etc will cause this "floatiness" during hard corning?

I feel my 986 corners worst than my wife's 2011 Golf TDI, which I know it shouldn't be and something needs to be replaced. Thanks for any input

__________________
His: 2003 Boxster & 2008 MDX
Hers: 2011 Golf TDI
evo-r is offline   Reply With Quote
Old 04-14-2014, 05:53 AM   #2
Registered User
 
jb92563's Avatar
 
Join Date: Apr 2012
Location: Riverside, CA
Posts: 1,665
Could also be the alignment. Perhaps more toe-in and camber is required.

Check tire pressures as well, around 30 psi is good and most importantly make sure both sides are equal.

Many folks including myself regularly Auto-X and with high speed, tight cornering like that, the car feels very solid and sure footed, nothing vague or floaty about it.

Definitely something wrong that you need to sort out.

I always start with the least expensive things and work toward the most expensive for resolution of unknown issues.
__________________
"It broke because it wants to be Upgraded "
2012 Porsche Performance Driving School - SanDiego region
2001 Boxster S, Top Speed muffler, (Fred's) Mini Morimotto Projectors, Tarret UDP,
Short Shifter, Touch Screen Dual Din Radio, 03 4 Bow glass Top (DD & Auto-X since May 17,2012)
jb92563 is offline   Reply With Quote
Old 04-14-2014, 06:01 AM   #3
Registered User
 
evo-r's Avatar
 
Join Date: Mar 2013
Location: Long Island, NY
Posts: 378
My wheel alignment was done last fall with the latest Hunter HawkEye alignment equipment.

Winter: 17" - 31psi front 37psi rear

Summer: 19" - 33psi front 38psi rear
__________________
His: 2003 Boxster & 2008 MDX
Hers: 2011 Golf TDI
evo-r is offline   Reply With Quote
Old 04-14-2014, 06:02 AM   #4
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
jb92563 makes some great points but the 11-year old shocks likely need replacement.

Floatiness is usually shocks/springs. Worn bushings typically add a vagueness to the steering and suspension because of the added movement of the components.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 04-14-2014, 07:58 AM   #5
Registered User
 
heymanwatchthis's Avatar
 
Join Date: Jul 2013
Location: Asheville, NC
Posts: 102
Replace your sway bar bushings - I had same issue, easy cheap fix with new sway bar bushings. Also make sure everything is tight... Good luck
__________________
'01 986S: LN IMS, PedroBar, PSS9 coil-overs, underdrive pulley, 997 short shift, GT3 console delete, Crios muffler mod
heymanwatchthis is offline   Reply With Quote
Old 04-14-2014, 08:11 AM   #6
Registered User
 
The Radium King's Avatar
 
Join Date: Apr 2010
Location: Canada
Posts: 3,121
are those front tire pressures hot or cold? if hot then you should be around 36 psi front - you might be rolling onto your sidewalks - chalk your tires and see what happens.

if cold then perhaps too hard; oem is 29 for the front I think - check front tire wear and see if you are wearing the middle of the tires more than this sides.
The Radium King is offline   Reply With Quote
Old 04-14-2014, 08:50 AM   #7
Registered User
 
Joe B's Avatar
 
Join Date: Dec 2012
Location: Jackson Hole, Wyoming
Posts: 800
Bottom line: there's something wrong with your Boxster. My wife has a BMW 325 xi, and cornering in my Boxster makes the BMW, which handles really well, feel like a pig in comparison. Of course, the Boxster has new ROW MO30 suspension, but it feels like it's on rails!
Joe B is offline   Reply With Quote
Old 04-14-2014, 09:07 AM   #8
Registered User
 
woodsman's Avatar
 
Join Date: Feb 2013
Location: Land of naught
Posts: 1,302
Why do you say 'you know your springs and shocks are good'? What's the mileage on both cars?
__________________
Death is certain, life is not.
woodsman is offline   Reply With Quote
Old 04-14-2014, 09:17 AM   #9
Registered User
 
evo-r's Avatar
 
Join Date: Mar 2013
Location: Long Island, NY
Posts: 378
Quote:
Originally Posted by woodsman View Post
Why do you say 'you know your springs and shocks are good'? What's the mileage on both cars?
Based from what I've observed, no leak on struts Boxster: 81k miles, TDI: 31k miles

Quote:
Originally Posted by The Radium King View Post
are those front tire pressures hot or cold? if hot then you should be around 36 psi front - you might be rolling onto your sidewalks - chalk your tires and see what happens.

if cold then perhaps too hard; oem is 29 for the front I think - check front tire wear and see if you are wearing the middle of the tires more than this sides.
Cold pressure and I bumpped up the front because my new front tires are 225 vs stock 205.

I'll need to have a good look at all the bushings.
__________________
His: 2003 Boxster & 2008 MDX
Hers: 2011 Golf TDI
evo-r is offline   Reply With Quote
Old 04-14-2014, 09:27 AM   #10
Registered User
 
woodsman's Avatar
 
Join Date: Feb 2013
Location: Land of naught
Posts: 1,302
I think the bumpy East coast roads have wore out your struts. And bushings. Your spring rates have dropped and the shock's ability to control body motions has diminished.
__________________
Death is certain, life is not.

Last edited by woodsman; 04-14-2014 at 09:29 AM.
woodsman is offline   Reply With Quote
Old 04-14-2014, 09:28 AM   #11
Registered User
 
Join Date: Aug 2007
Location: New Jersey
Posts: 691
Worn front control arm bushings will cause vaugeness in the steering (floating).

You put on new front tires? How about the rears? Do your tires match?

Has the car been in a collision? Any front end damage?

===

Car needs:

- Front control arm bushings, struts, springs (lower it), matching tires, proper alignment.


/
__________________
SOLD - 2002 Boxster S - PSM, Litronics, De-ambered, Bird Bike Rack, Hardtop, RMS leak...
fatmike is offline   Reply With Quote
Old 04-14-2014, 09:34 AM   #12
Registered User
 
evo-r's Avatar
 
Join Date: Mar 2013
Location: Long Island, NY
Posts: 378
All 4 tires were replaced with brand new Conti DWS a year ago. I'll look closer at all my bushings and struts.
__________________
His: 2003 Boxster & 2008 MDX
Hers: 2011 Golf TDI
evo-r is offline   Reply With Quote
Old 04-14-2014, 11:49 AM   #13
Registered User
 
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
This is going to be an expensive repair once you start replacing suspension parts. I changed out my struts and decided to do the rest of the suspension bits since it was all apart anyway and hey, let's get the wheel bearings done too because they're a little noisy and $3200 later...
RandallNeighbour is offline   Reply With Quote
Old 04-14-2014, 12:11 PM   #14
Registered User
 
Join Date: Aug 2007
Location: New Jersey
Posts: 691
Conti DWS's are a snow tire.


/
__________________
SOLD - 2002 Boxster S - PSM, Litronics, De-ambered, Bird Bike Rack, Hardtop, RMS leak...
fatmike is offline   Reply With Quote
Old 04-14-2014, 12:17 PM   #15
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
My shocks were toast before 70K miles. Ditto for the CA's and wheel bearings. And by toast I mean it was embarrassing how shredded they were. Mind you my car was always garage kept and driven only on weekends. These cars may be reliable, but in the North East they are not at all durable.

RandallNeighbohr is spot on cost. This was easily my most expensive suspension overhaul of any previous car. I usually flip to my copy of "101 Projects for Your Porsche Boxster" to guestimate the cost of a big job. Between parts and labor I think we were well over $7K and my indy's rate is a very sensible $85 an hour. Most of the cost were the pricey Porsche parts.

if you're getting out-handled by a top heavy Golf, then I'm guessing you're due for a lift inspection.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW

Last edited by Perfectlap; 04-14-2014 at 12:21 PM.
Perfectlap is offline   Reply With Quote
Old 04-14-2014, 05:21 PM   #16
Registered User
 
evo-r's Avatar
 
Join Date: Mar 2013
Location: Long Island, NY
Posts: 378
I guess I was exaggerating and used the wrong term "floaty". I'm sure at its current condition it can still out corner the TDI. I'm mainly annoy of the rear clatter noise when going over rough roads at low speed due to the need for some new track/trailing arms. In any case, I'll inspect all the bushings and suspension components when I change the oil in the coming weeks. Thanks again guys for all your inputs
__________________
His: 2003 Boxster & 2008 MDX
Hers: 2011 Golf TDI
evo-r is offline   Reply With Quote
Old 04-15-2014, 09:19 AM   #17
Registered User
 
loudes13's Avatar
 
Join Date: Jul 2012
Location: Dundee, IL
Posts: 12
Honestly the 986 strut suspension, dinky front tires, and lack of negative camber never handle all that great. They all understeer from the factory.

Before you start swapping parts drive another and see it feels the same. The Conti DWS are good tires, but they are very hard, favoring long wear over grip.

As a long time autoxer, racer, and instructor you can try 2 more psi in the front see it that helps make the front feel better. In reality unless you are autoxing or doing track days, you are nowhere close to the limits on the street.
__________________
www.allenskillicorn.com
'01 Boxster S Daily Driver
BM/DSR Legrand DSR-1
loudes13 is offline   Reply With Quote
Old 04-15-2014, 09:37 AM   #18
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Quote:
Originally Posted by evo-r View Post
All 4 tires were replaced with brand new Conti DWS a year ago. I'll look closer at all my bushings and struts.
What size are the new tires ? are they taller?
__________________
OE engine rebuilt,3.6 litre LN Engineering billet sleeves,triple row IMSB,LN rods. Deep sump oil pan with DT40 oil.
BYprodriver is offline   Reply With Quote
Old 04-15-2014, 10:06 AM   #19
Registered User
 
evo-r's Avatar
 
Join Date: Mar 2013
Location: Long Island, NY
Posts: 378
Quote:
Originally Posted by BYprodriver View Post
What size are the new tires ? are they taller?
New front tire size has lower profile to keep the diameter the same as stock;

New size: Front 225/45-17, Rear 255/40-17
Stock size: Front 205/50-17, Rear 255/40-17

Quote:
Originally Posted by loudes13 View Post
...As a long time autoxer, racer, and instructor you can try 2 more psi in the front see it that helps make the front feel better. In reality unless you are autoxing or doing track days, you are nowhere close to the limits on the street.
I'll try adding 2 more psi to the front or soon I'll just put on my summer 19" wheels.
__________________
His: 2003 Boxster & 2008 MDX
Hers: 2011 Golf TDI
evo-r is offline   Reply With Quote
Old 04-15-2014, 10:39 AM   #20
Schatten-Baum-Mechaniker
 
Join Date: Mar 2005
Location: Mississippi
Posts: 242
Its likely just the tires.
Tirerack summed these up:

Continental ExtremeContact DWS (Ultra High Performance All-Season 245/40R18 97Y)

What We Liked: Comfort out on the road
What We'd Improve: Handling precision and steering response
Conclusion: Delivering a good blend of road manners and handling, with a reputation for very good winter traction

Since you have summer wheels and tires (hopefully not all weather), swap to those then report back on how it feels.

If it's still bad, its either alignment or suspension is worn.

BTW, 19" wheels are not recommended on early Boxsters due to handling and suspension wear issues.

__________________
Tommy
2000 Boxster S
1973 914

Last edited by tommy986; 04-15-2014 at 10:46 AM.
tommy986 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 05:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page