Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-02-2014, 01:39 PM   #1
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
I did not watch the video but sounds like you upset the balance of the car mid-turn. If downshift to a lower gear that excessively raises rpms when you reengage the clutch, it's known as "engine braking" & has same effect as pulling the hand parking brake.
As you prepare to enter a turn complete all braking & shifting while the car & steering wheel are pointing straight. This allows you to go slower into the turn & faster out, which is the fastest overall strategy & incidentally safer if that's important to you.Get you & your Box out to a autocross where you can practice car control while only risking killing some cones. Boxster is one of the best street vehicles ever made to do what you direct it to do. Unfortunately if you give the wrong directions it follows those also without prejudice.
__________________
OE engine rebuilt,3.6 litre LN Engineering billet sleeves,triple row IMSB,LN rods. Deep sump oil pan with DT40 oil.

Last edited by BYprodriver; 01-02-2014 at 01:43 PM. Reason: more info
BYprodriver is offline   Reply With Quote
Old 01-02-2014, 06:08 PM   #2
Registered User
 
Join Date: May 2011
Location: Miami florida
Posts: 1,591
Quote:
Originally Posted by BYprodriver View Post
I did not watch the video but sounds like you upset the balance of the car mid-turn. If downshift to a lower gear that excessively raises rpms when you reengage the clutch, it's known as "engine braking" & has same effect as pulling the hand parking brake.
As you prepare to enter a turn complete all braking & shifting while the car & steering wheel are pointing straight. This allows you to go slower into the turn & faster out, which is the fastest overall strategy & incidentally safer if that's important to you.Get you & your Box out to a autocross where you can practice car control while only risking killing some cones. Boxster is one of the best street vehicles ever made to do what you direct it to do. Unfortunately if you give the wrong directions it follows those also without prejudice.
In addition to the good advice a bout about braking and downshifting before the corner, you have tu understand WHERE in a turn you can apply hard throttle.

Every turn consists of two phases, the first, when you turn the steering wheel in and the second when you unwind thenwheel the wheel back to center. Any hard application of throttle as you are turning in and you will spin. That's what you see most of the guys in the video doing.

Now, as you start to turn the wheel back to center you can apply increasing amounts of throttle all the way to full throttLe, as you come closer and closer to getting the steering wheel back to center.

Try this. Go to a safe parking lot on a wet or snowy day and as you make a slow speed turn, around 25-30 mph, hit the gas hard as you turn the wheel. You will spin. Do the same turn but this time, wait until you are unwinding the wheel and progressivel hit the gas hard as you keep unwinding the wheel. The rear tires will spin up but the car will not spin, ,you will exit the corner with the car perfectly straight, in control and the whole maneuver should not should not induce panic at all, in fact, once you get the hang of it, it's a blast. Be safe.
__________________
Current car

2000 Boxster 2.7l red/black

Previous cars

1973 Opel Manta
1969(?) Fiat 850 Convertible
1979 Lancia Beta Coupe
1981 Alfa Romeo GTV 6
1985 Alfa Romeo Graduate
1985 Porsche 944
1989 Porsche 944
1981 Triumph TR7
1989 (?) Alfa Romeo Milano
1993 Saab 9000
san rensho is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page