|
On my car, since I have it, the oil measurement is mandatory. So If I put the key and turn into the position 1 (run) or 2 (start), the system takes the time to measure the oil level (making the noise bip, bip, bip, etc.). In the position 2, after the measure, the engine possibly (this word is the problem) starts. And now it takes more and more time and/or attempts to start.
In all the others cars I drive and drove, when the key is turned to the position 2 (start), the engine starts immediately.
Why not in my 986? There is a problem, but I do not know which one.
|
Threaded Mode
