How Light is Your Flywheel+Clutch?

[maytag]

Originally Posted by Lew

I just gotta laugh at this....The name Maytag fits you perfectly....Wishy Washey!

The Devil made me do it!

5 to 1 odds you don't do it! Anyone else think that?

ahhh, say what you will, Lew.... but when I make the decision, it will be a decision I've made after I have considered ALL of the risks, benefits, costs, etc. Not because I have joined the rest of the sheep. Your silly taunting aside.

If cost is of no importance to you, congratulations. But cost (value) is ALWAYS a consideration for me. It WILL always be so. I'd enjoy you explaining to me why it shouldn't be thus, but I assume you would merely quote someone else again, since so far I haven't seen you present any of your own original thinking to the matter. Again, your silly taunting aside.

For the record: "Maytag" comes from being the guy who can fix or build ANYTHING track-side. I'd stack that name up against "lew" all day, and twice on Sundays. Since you asked.

[WillH]

18 lbs is a lot of rotating mass to lose. If you put a few back with the harmonic balancer for the crank pulley you still have a lot less mass to spin up. This will probably be my way to go when the clutch is due.

[itsnotanova]

I'd have to say that almost every track boxster, 996, 997 and 987 is using a LWFW. Most motors I hear of go out because of oiling issues, spun bearings or rods. There has been a few cranks breaking but not many. I totally respect Jake's opinion on the M96/M97 motor but I have to disagree about using a LWFW. Maybe it's like the ims bearing and track cars don't have as many issues as the street cars?

[maytag]

Originally Posted by itsnotanova

I'd have to say that almost every track boxster, 996, 997 and 987 is using a LWFW. Most motors I hear of go out because of oiling issues, spun bearings or rods. There has been a few cranks breaking but not many. I totally respect Jake's opinion on the M96/M97 motor but I have to disagree about using a LWFW. Maybe it's like the ims bearing and track cars don't have as many issues as the street cars?

Thanks Woody.
That concurs with all of my own searching. I've read and read and read until my eyes glazed-over. I've spoken, to, visited, emailed and FBM'd with dozens of individuals representing (combined) hundreds of cars running LWFW on their 986 motors of every ilk, size, mileage, etc. I cannot find a single person who can offer me a solid "yes, I had a motor that had a crankshaft failure that I can attribute to a LWFW. Let me tell you about it". Except the one, single, lone example that everybody references. That guy is on renntech. His crank failed in his 996 motor with a LWFW and a SLEW OF OTHER modifications.

So I think I have proven beyond any reasonable doubt that the LWFW does NOT cause crankshafts to fail. I will state that unequivocally, based solely on the data. (I mean, as long as we're considering opinions to be facts, mine might as well be too, right?)