01-22-2019, 09:12 AM
|
#4721
|
Registered User
Join Date: Dec 2015
Location: Denver
Posts: 866
|
Quote:
Originally Posted by Oldcarguy
Hi Ciao, it’s from a company called Mueller-Kueps. They’re in Germany and they make speciality automotive tools. Just google their name and you’ll find their website. They don’t sell directly to the public. I purchased through a vendor on eBay (Tooldom). I also purchased the M-K axle pusher for my axle replacement (received but haven’t used it yet).
For the bleeder, there are deep socket and shallow socket versions in 10 or 11mm. I purchased the deep socket 11mm version. The socket is hollow and it seems to be permanently attached to the reversible ratchet. It comes with a good quality bleeder hose (~1 meter length) that runs freely through the socket and ratchet.
I attached the bleeder hose to the clutch slave bleeder valve, attached the other end of the hose to my brake bleeder catch can, slid the ratchet/socket assembly onto the bleeder valve, made sure I had fluid and pressure in the Motive and let it rip. Standard operating procedure from that point forward. After bleeding, I just slid the ratchet/socket assembly down the hose and removed the hose from the valve.
I had also purchased a much less expensive ‘bleeder’ ratchet but it had a shallow socket that had a fixed grommet / hose assembly built into it and I did not like the way it barely fit and was difficult to remove from the bleeder valve (tested on a brake valve).
Just to mention that I had the braces, pan and midpipes removed, along with the axle disconnected from the trans axle, when I bled the clutch slave. Taking advantage of my axle / midpipe replacement project made for much easier access to the clutch slave.
|
Oldcarguy, those are innovative workarounds in tight spots e.g. clutch slave.
Thanks for sharing!
__________________
5280 Cruising @High Altitude
Seal Gray & K&N Filter
|
|
|
01-25-2019, 09:50 AM
|
#4722
|
Multi-Boxer Driver
Join Date: Nov 2010
Location: Orange Park, FL
Posts: 1,417
|
Finished installing (color-coded) LEDs into the taillights and front turn signals. The 5008 bulbs for the rear markers (between the rear fog and brake light bulbs) did not work with the LEDs I got so just added new bulbs for now. A Novita EP35 relay keeps the signal flashing correct.
__________________
-Chris
2004 Porsche Boxster 2.7 (gone )
2004 Porsche 911 C4S Cab
1991 Porsche 911 C2 Targa 3.6
2017 Subaru Outback 3.6R
|
|
|
01-25-2019, 12:45 PM
|
#4723
|
Registered User
Join Date: Jul 2014
Location: Valparaiso, IN
Posts: 184
|
Looked at the calendar and discovered it's only 51 days until "Boxster Freedom Day" when I will take it out of storage. It was -8 this morning so it's hard to imagine that in only 51 days balmy breezes will be blowing and it will be time (hopefully) for another seven months of top down driving!
Larry (The Bald Eagle)
Yeah, I'm an optimist
|
|
|
01-25-2019, 12:50 PM
|
#4724
|
Registered User
Join Date: Aug 2015
Location: Fulshear, TX
Posts: 266
|
Installed the new shifter cables and adjusted the shifter and the parking brake. Found a few more quarters hidden under the parking brake. Took the opportunity to install the newly painted white center console and it really makes a big difference on the interior.
Dave in TX
|
|
|
01-25-2019, 12:53 PM
|
#4725
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,731
|
Quote:
Originally Posted by dsallean
Installed the new shifter cables and adjusted the shifter and the parking brake. Found a few more quarters hidden under the parking brake. Took the opportunity to install the newly painted white center console and it really makes a big difference on the interior.
Dave in TX
|
That color combination looks really nice
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
01-25-2019, 02:25 PM
|
#4726
|
Registered User
Join Date: Aug 2015
Location: Fulshear, TX
Posts: 266
|
Quote:
Originally Posted by BruceH
That color combination looks really nice
|
Thanks. Matches the exterior of course and really happy with it.
|
|
|
01-27-2019, 11:35 PM
|
#4728
|
Registered User
Join Date: Feb 2017
Location: CO
Posts: 989
|
Tried a little experiment. Bought a leather cover for my console lid and tackled the install. Not hard, but not easy. Fortunately, I have a little experience with this type of stuff, so sort of had a clue going in. For $29.00 and about 2 or so hours... I think it worked out nicely!
|
|
|
01-28-2019, 05:27 AM
|
#4729
|
Registered User
Join Date: Oct 2018
Location: Evergreen, CO
Posts: 108
|
TRIED to install the Bluetooth adapter and CDR220 this weekend but realized that the CDR220 doesn’t work to replace a CDR23 Bose unit. Different antenna connection and no connection to the Bose system.
Reinstalled original unit and back to square one.
Still looking for a way to run at least an AUX audio source (with Bluetooth preferred) for music in the 986S.
I’m not interested in replacing with a non-factory headset isn’t an option. I want to keep the original look but with updated tech. Ideas appreciated.
Sent from my iPhone using Tapatalk
|
|
|
01-28-2019, 05:48 AM
|
#4730
|
Registered User
Join Date: Nov 2015
Location: ontario
Posts: 377
|
Quote:
Originally Posted by Geof3
Tried a little experiment. Bought a leather cover for my console lid and tackled the install. Not hard, but not easy. Fortunately, I have a little experience with this type of stuff, so sort of had a clue going in. For $29.00 and about 2 or so hours... I think it worked out nicely!
|
What did the install involve? Also do you have the take the console out to remove the armrest?
|
|
|
01-28-2019, 06:19 AM
|
#4731
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,731
|
Quote:
Originally Posted by imhighlander
TRIED to install the Bluetooth adapter and CDR220 this weekend but realized that the CDR220 doesn’t work to replace a CDR23 Bose unit. Different antenna connection and no connection to the Bose system.
Reinstalled original unit and back to square one.
Still looking for a way to run at least an AUX audio source (with Bluetooth preferred) for music in the 986S.
I’m not interested in replacing with a non-factory headset isn’t an option. I want to keep the original look but with updated tech. Ideas appreciated.
Sent from my iPhone using Tapatalk
|
Take a look at the Continental radio. It looks OEM and has Bluetooth.
Continental TR7412UB-OR Stereo Installation and Review
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
01-28-2019, 06:33 AM
|
#4732
|
Who's askin'?
Join Date: Mar 2018
Location: Utah
Posts: 2,446
|
Quote:
Originally Posted by BruceH
|
Does it work with the factory bose system?
Sent from my SM-G930T using Tapatalk
|
|
|
01-28-2019, 01:05 PM
|
#4733
|
Registered User
Join Date: Oct 2018
Location: Evergreen, CO
Posts: 108
|
Quote:
Originally Posted by BruceH
|
That indeed looks fantastic. If it connects to the Bose harness, I'm IN.
Thanks for the lead!
|
|
|
01-28-2019, 01:23 PM
|
#4734
|
Registered User
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,731
|
Quote:
Originally Posted by imhighlander
That indeed looks fantastic. If it connects to the Bose harness, I'm IN.
Thanks for the lead!
|
You are welcome. I have no idea if it does work with the Bose system but reading through that thread, someone linked to a harness that does connect to the MOST system.
https://www.bergvillfx.com/index.php/products/car-audio/wiring-harnesses/iso-audio-power-harness-porsche-996-boxster-m490.html
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
|
|
|
01-28-2019, 01:25 PM
|
#4735
|
Registered User
Join Date: Oct 2018
Location: Evergreen, CO
Posts: 108
|
Quote:
Originally Posted by BruceH
|
Yeah, I came across that on their site. I'm now waiting on my inquiry to their service desk but if they give the Bose the green light I'll be doing this ASAP.
|
|
|
01-28-2019, 02:16 PM
|
#4736
|
Who's askin'?
Join Date: Mar 2018
Location: Utah
Posts: 2,446
|
Quote:
Originally Posted by imhighlander
Yeah, I came across that on their site. I'm now waiting on my inquiry to their service desk but if they give the Bose the green light I'll be doing this ASAP.
|
Please let us know. I've been looking for a solution myself.
|
|
|
01-28-2019, 04:03 PM
|
#4737
|
Registered User
Join Date: Nov 2018
Location: Pomona, CA
Posts: 158
|
Did the OBC Hack.
__________________
'99 986 Base
2010 Golf TDI
'74 914 2.0
'56 356A
|
|
|
01-28-2019, 10:28 PM
|
#4738
|
Registered User
Join Date: Feb 2017
Location: CO
Posts: 989
|
Quote:
Originally Posted by boxxster
What did the install involve? Also do you have the take the console out to remove the armrest?
|
The armrest portion is simply the cover. It has 8 t-hex bolts that hold it to the frame. Open your console, remove bolts... Lifts right off. You must remove the factory vinyl cover by peeling it off and then scraping, pulling or whatever method to get the foam and old adhesive off. 3m 90 spray contact adhesive for regluing. The hard part is getting everything lined up and then folded down and properly laid down around the edges and underside. The piece is precut and fits well, but is pretty thick at the seams. One of my seams is a little off to the right in the pic. Not sure if I over stretched that portion or if that is just a bit off from the company. It is hand stitched so it’s possible it was a bit off to begin with.
Last edited by Geof3; 01-29-2019 at 09:56 PM.
|
|
|
01-29-2019, 07:16 AM
|
#4739
|
Multi-Boxer Driver
Join Date: Nov 2010
Location: Orange Park, FL
Posts: 1,417
|
In process of refreshing the vanity mirrors with new covers...
__________________
-Chris
2004 Porsche Boxster 2.7 (gone )
2004 Porsche 911 C4S Cab
1991 Porsche 911 C2 Targa 3.6
2017 Subaru Outback 3.6R
|
|
|
01-29-2019, 11:12 AM
|
#4740
|
Registered User
Join Date: Jul 2014
Location: Valparaiso, IN
Posts: 184
|
geof3 where did you source the cover from?
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 09:17 PM.
| |