Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-02-2015, 07:06 PM   #1701
Registered User
 
Join Date: Apr 2013
Location: Buffalo NY
Posts: 184
I washed it and then failed to do an oil change. I got motul 8100 and a filer wrench from amazon. Got it up onto the ramps, opened my amazon box, and realized that the filter and filter wrench were being shipped separately....

cardiffgiant is offline   Reply With Quote
Old 05-03-2015, 08:38 AM   #1702
Registered User
 
Join Date: Mar 2014
Location: Eastern NC
Posts: 700
Garage
Quote:
Originally Posted by Drahthaar View Post
BFeller...you can do that? I have one that rattles a bit because it is not a very tight fit.
Yes, the toll bar clips can be replaced. A piece of plastic broke on my mounting clip. A kit is available at Pelican that contains the two clips for the roll bar and the tab for the base of the windscreen. It also contains rivets for attaching. I had previously also replaced one of the lever clips on the windscreen itself because it broke off. I still haven't figured out to get the windscreen on and off properly.
BFeller is offline   Reply With Quote
Old 05-03-2015, 04:03 PM   #1703
Registered User
 
Jinx's Avatar
 
Join Date: Apr 2014
Location: Pittsburgh
Posts: 158
Garage
Went out to lunch at the Olive Garden. Top down.
Came home and conditioned All the weatherstripping.
Siliconed the mechanism for the clamshell, top
And locks

Annual oil change scheduled for
This Friday. Using Royal Purple
HPS 10w-40. 13 months 4,900 miles.

Then put her to bed.
__________________
Jinx & Bill

Last edited by Jinx; 05-03-2015 at 04:07 PM.
Jinx is offline   Reply With Quote
Old 05-03-2015, 04:54 PM   #1704
Registered User
 
Join Date: Dec 2013
Location: Cambridge. Ontario
Posts: 128
Popped the bumper and cleaned out the rads! I cannot believe how much crud accumulates in there!
__________________
Chris
'86 944, manual steering, a/c delete, 944Max chip
'87 951, K27, LBE, Turbo S brakes, Koni Yellows, Weltmeister sway bars / strut brace, LSD, full cage, OMP race seats
'01 Boxster - Seal Grey / Black / Black, Litronics upgrade / de-ambered
crooster is offline   Reply With Quote
Old 05-03-2015, 07:55 PM   #1705
2003 S, Arctic Silver, M6
 
paulofto's Avatar
 
Join Date: Oct 2014
Location: Winnipeg, MB, Canada
Posts: 1,346
Garage
plastidipped my sticky knobs . . .

Radio knobs that is. They look brand new. Washed and waxed the exterior vacuumed and leather treated the interior.
then I had a cold brew
paulofto is offline   Reply With Quote
Old 05-04-2015, 06:12 AM   #1706
Registered User
 
Join Date: May 2011
Location: Johnstown, PA
Posts: 195
well, the replacement coolant expansion tank arrived via FedEx, it is not gonna be a fun boxster day.
mump is offline   Reply With Quote
Old 05-04-2015, 10:05 AM   #1707
Registered User
 
Join Date: May 2010
Location: MN
Posts: 59
projects

Sparks plugs, Liquid Molly oil change, front lower control arm, diagonal control arm, drop links, poly bushing for sway bar, short shifter, belt.
Wild Bill is offline   Reply With Quote
Old 05-04-2015, 10:31 AM   #1708
Registered User
 
Join Date: Aug 2012
Location: Los Angeles
Posts: 124
Dropped off the Box for a long overdue clutch. Will finally learn which IMS bearing this one has. 2000 base with April 2005 remanufactured engine.
teleski is offline   Reply With Quote
Old 05-04-2015, 03:53 PM   #1709
Motorist & Coffee Drinker
 
78F350's Avatar
 
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,818
Garage
Finally got around to cleaning the radiators. Perhaps a bit past due.

78F350 is offline   Reply With Quote
Old 05-04-2015, 06:02 PM   #1710
Registered User
 
Join Date: Nov 2014
Location: Prairieville Louisiana
Posts: 17
Garage
6 months / 6000 miles of ownership

Changed the oil and filter and Raggtopped the top to celebrate.
ugatha is offline   Reply With Quote
Old 05-04-2015, 06:11 PM   #1711
Registered User
 
Join Date: Mar 2015
Location: St Pete
Posts: 22
Brake lights were out so I pulled out the brake light switch and gave it a good cleaning and BINGO I had brake lights again. Then I took it for a long drive down the beach.
__________________
1999 Boxster Base // Arctic Silver // 5-Speed
ryoder986 is offline   Reply With Quote
Old 05-04-2015, 07:31 PM   #1712
Registered User
 
fins's Avatar
 
Join Date: Mar 2015
Location: Ellisville, MS
Posts: 102
Super glued one upholder shut due to broken spring -- these guys are really worthless....
__________________
2001 Boxster S: Triple Black, Sport Package, Special Chasis Rigidly Tuned, Headlight Washers, Turbo Wheels, Litronics, Full Leather, 03 Top, Sumitomo HTR ZIII, IMS/RMS, Kenwood KDC-BT562U, DEPO Tails, Cocomats, KUDA Cellphone Holder, Ultimate Cupholders, Zaino Shine

PCA-MAGNOLIA
fins is offline   Reply With Quote
Old 05-04-2015, 07:54 PM   #1713
Registered User
 
Join Date: Nov 2009
Location: Winnipeg MB
Posts: 2,485
Brake/clutch fluid flush, changed air/cabin filters, topped up ps fluid, lubed the clamshell, and FINALLY installed the US size cigar lighter socket.

The bad news - I see one of my rear struts is leaking. Damn thing only lasted 135000km. I suppose my options are 1) buy a good used strut, 2) replace both rear struts with new, 3) replace all four struts, 4) ROW M030 kit. There's a decision that was already made ages ago. :dance:
__________________
'99 black 986
Mark_T is offline   Reply With Quote
Old 05-04-2015, 11:31 PM   #1714
Registered User
 
Spinnaker's Avatar
 
Join Date: Dec 2007
Location: Seattle
Posts: 735
Bought an AFE air filter last year and finally got around to installing it today. After opening the engine bay, the usual dusty mess stared back at me. Since it was right in front of me and wasn't going to go away by itself, I hit it with a mixture of Simple Green and QuicknBrite cleaner. Used a 3" paint brush to scrub all the surfaces, then rinsed it with the garden hose. Sure looks a lot better now.





Checked the drains while I had it opened up. Water drained out just fine, but I could see something stuck in the upper section of the drains just below the foam tray on both sides. Fished these out with a pair of needle nose pliers. Some PO or mechanic is probably still looking for that torx bit.

__________________
2000S Ocean Blue Metallic- 116K
3X Water Pump, Clear side markers, Crios Mod, Front engine mount, Flywheel, clutch, RMS, AOS, MAF, serpentine belt, power brake vacuum line, battery, 2X CV boots, Fuel filter, Oil filler tube, 3X ignition switch, 90K service, gas cap, Coolant tank
Spinnaker is offline   Reply With Quote
Old 05-05-2015, 07:29 AM   #1715
Registered User
 
Luv2Box's Avatar
 
Join Date: Dec 2014
Location: Pacific Grove, CA
Posts: 494
Garage
Took my '99 986 on four parade laps around Laguna Seca. I was fourth behind the pace 911 and there were 96 Porsches behind me so the pace car punched it and those of us in the front got to get some speed up. Normal parade lap speed is around 35-40 mph and normal parade laps are two but since there were 100 cars on the track the front group got up to spoiler up speed. Woohoo! Pics are from the grid.

Luv2Box is offline   Reply With Quote
Old 05-05-2015, 01:33 PM   #1716
Registered User
 
PaulDash's Avatar
 
Join Date: Sep 2013
Location: KRK, PL, EU
Posts: 255
Garage
Got the suspension aligned. Yay!



Found out my front shocks need replacement. Nay!
__________________
Past: 944 NA white '86
Present: 986 black '98
Future: 959
PaulDash is offline   Reply With Quote
Old 05-07-2015, 10:02 AM   #1717
Registered User
 
Drahthaar's Avatar
 
Join Date: Apr 2015
Location: AZ
Posts: 23
Garage
Noticed Outside Temp Sensor had fallen out of its clip and was way down in the bottom of front bumper...re-installed in proper location, now the temp no longer reads 40 degrees too high!!! Now it agrees with Weather Channel app.

Lubed "clutch pedal spring" under dash--no more squeak!!

Took apart accelerator pedal assembly. Lubed the two ball joints inside it-- no more "sticky" accelerator!!!
Drahthaar is offline   Reply With Quote
Old 05-07-2015, 10:47 AM   #1718
Registered User
 
Porsche9's Avatar
 
Join Date: Sep 2013
Location: Chandler, AZ
Posts: 1,796
Had the dent doctor come to the house and remove a few small dings. $75 well spent to keep her looking good.
__________________
03 Carrera
02 Boxster S Guards Red, black interior with matching hardtop
89 Carrera 4
89 944 S2
78 911SC
Porsche9 is offline   Reply With Quote
Old 05-07-2015, 12:58 PM   #1719
Registered User
 
Join Date: Jun 2014
Posts: 37
Blew it up sadly - 3rd to 4th around 3000 rpm, white smoke, stopped no coolant, smell of oil from coolant!

Thinking liner gone or blow head, time to pay out I guess!!!!
andys320 is offline   Reply With Quote
Old 05-07-2015, 01:25 PM   #1720
Registered User
 
kjc2050's Avatar
 
Join Date: Oct 2012
Location: Wake Forest, NC
Posts: 867
Garage
Quote:
Originally Posted by andys320 View Post
Blew it up sadly - 3rd to 4th around 3000 rpm, white smoke, stopped no coolant, smell of oil from coolant!

Thinking liner gone or blow head, time to pay out I guess!!!!
Ugh. Good luck!

__________________
2000 Boxster S, 6 speed, Sport Package, Litronics, LED tail lights, LNE IMS-B, OBC, Skybreaker wind deflector, Arctic Silver/Graphite Grey
kjc2050 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page