03-26-2015, 02:00 PM
|
#1641
|
Registered User
Join Date: Jun 2014
Location: New Jersey
Posts: 230
|
Tell us more about the vehicle please- year, miles etc. Pictures of the old bearing? I don't know much better but a lot of people here will say your engine was not eligible for a straight up bearing replacement so consider yourself warned in advance.
Quote:
Originally Posted by jrcui
Just picked mine up from the Indy... Took it in last week for my yearly oil change (only drive about 2K a year) and had them cut open the filter. The news wasn't good. Metal in the filter. Scheduled a ims retrofit on Monday and they finished the work this morning. When they got to the bearing, they noted it was failing. Bearing was replaced and sump dropped for cleaning. Metal and plastic were found in the sump, and the intake tube had debris in it. They also replaced the RMS with the new style. Total cost 2400.00, but engine sounds smoother and I can breathe easier now... Just glad wife was supportive haha... More botox for her now.
|
__________________
2001 Seal Gray Boxster (Hair Salon on wheels)
2013 Audi Q5 (Family Mover)
2006 Yamaha R1 (Adrenaline Machine)
|
|
|
03-26-2015, 03:47 PM
|
#1642
|
Registered User
Join Date: Feb 2008
Location: Oregon
Posts: 98
|
2000 base 2.7 with 109k miles. Shop used the LN retrofit kit. No pics (I forgot to ask) but shop is super legit so I trust their word. While in there, they checked clutch (which they said was in great condition) and replaced the RMS with the new style seal. I've owned the car since Dec 2011 and only put 6k on it since owning it. I've changed the oil at leat 4 times and on the last change is when they noticed the metal.
|
|
|
03-26-2015, 04:16 PM
|
#1643
|
Registered User
Join Date: Dec 2012
Location: Jackson Hole, Wyoming
Posts: 800
|
Quote:
Originally Posted by jrcui
Just picked mine up from the Indy... Took it in last week for my yearly oil change (only drive about 2K a year) and had them cut open the filter. The news wasn't good. Metal in the filter. Scheduled a ims retrofit on Monday and they finished the work this morning. When they got to the bearing, they noted it was failing. Bearing was replaced and sump dropped for cleaning. Metal and plastic were found in the sump, and the intake tube had debris in it. They also replaced the RMS with the new style. Total cost 2400.00, but engine sounds smoother and I can breathe easier now... Just glad wife was supportive haha... More botox for her now.
|
I bet Jake R. will say they should have torn the whole engine apart to get any metal contamination out.
|
|
|
04-04-2015, 11:23 AM
|
#1644
|
Registered User
Join Date: Jun 2014
Location: Whitby ontario
Posts: 126
|
decided to take a drive up to the lake since the Box was in storage all winter......got myself a speeding ticket!! Grrrr!
__________________
Previous 2 seaters:
1975 Triumph TR7
1979 Fiat X19
1977 Lotus Esprit
Honey it's an investment!
|
|
|
04-04-2015, 08:50 PM
|
#1645
|
Registered User
Join Date: Sep 2014
Location: Canada
Posts: 93
|
Finally got the Boxster out of hibernation today, with some upgrades
Upgraded high-end audio system.
Painted the calipers, new pads and brake fluid using Pedro's very helpful DIY guides. Thanks Pedro!
Re-painted the emblem, the S matching the callipers.
Went for a long drive today. Big grin
|
|
|
04-04-2015, 09:07 PM
|
#1646
|
Need For Speed
Join Date: Feb 2013
Location: Funville
Posts: 2,112
|
Very nice newBgeek!
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
|
|
|
04-08-2015, 07:56 PM
|
#1647
|
Registered User
Join Date: Mar 2014
Location: Eastern NC
Posts: 700
|
Spent two hours Tuesday removing the front motor mount after draining the cooling. I also mounted the new one in the yoke. Wednesday spend two and a half hours torquing the mount into the yoke and reinstalling the entire assembly. It is bit more fiddly going back on the car. I also removed the water pump and thermostat and installing the replacements. Tomorrow will be set aside to reattach the coolant hoses and try the Uview to test the seal. There is a new belt ready to go and fresh coolant in jugs ready for the refill. Hopefully it will be on the road by the weekend.
|
|
|
04-09-2015, 06:12 PM
|
#1648
|
Registered User
Join Date: Apr 2013
Location: Buffalo NY
Posts: 184
|
Today was a very productive car day:
-Took off from work
-Turned in my wifes leased Jetta
-Went shopping for a replacement and and struck a killer deal on a Honda Pilot EXL
-Called my storage co. to get the Boxster prepped for pickup
-The two of us killed an hour playing racing games at Dave and Busters
-Picked up my fully detailed Boxster (it looks so friggin good)
-Hit the movies and saw Furious 7
Last edited by cardiffgiant; 04-09-2015 at 06:15 PM.
|
|
|
04-10-2015, 07:58 AM
|
#1649
|
Registered User
Join Date: Feb 2015
Location: Manila
Posts: 20
|
in the shop today
|
|
|
04-10-2015, 11:17 AM
|
#1650
|
Registered User
Join Date: Apr 2012
Location: Mid-Michigan
Posts: 89
|
Today ...drove it to work
Yesterday drove it on a three hundred mile trip to Northern Michigan and back.
Wednesday installed a new motor mount and an underdrive pulley.
|
|
|
04-10-2015, 12:53 PM
|
#1651
|
Registered User
Join Date: Nov 2014
Location: Long Island, NY
Posts: 160
|
Finally got the car back together after replacing IMS bearing. New axle boots also installed. Everything is ready except for starting it since the work has been completed and checking tire pressure. Should be starting the car tomorrow and I'll see if I did it right. Wish me luck.
|
|
|
04-10-2015, 03:22 PM
|
#1652
|
Registered User
Join Date: Sep 2014
Location: santa barbara, CA & Devon, UK
Posts: 316
|
I did my first Boxster oil change last night!
Wow! That's alot of oil! Twice as much as most of my other cars I've owned!
I checked the filter - no metal bits but had a few very small black plastic? grains and a couple of small (1/16") brownish bits. Hopefully nothing serious?
I used my homemade car ramps - made of all my wood offcuts
|
|
|
04-10-2015, 06:48 PM
|
#1653
|
Need For Speed
Join Date: Feb 2013
Location: Funville
Posts: 2,112
|
Quote:
Originally Posted by njbray
I did my first Boxster oil change last night!
Wow! That's alot of oil! Twice as much as most of my other cars I've owned!
I checked the filter - no metal bits but had a few very small black plastic? grains and a couple of small (1/16") brownish bits. Hopefully nothing serious?
I used my homemade car ramps - made of all my wood offcuts
|
I like your ramps!
Could be the oil hasn't been changed in a while. When I did my first change I had some brownish almost amber looking bits in the filter. Not sure about the black bits. I change the oil every 5k miles and have had nothing in the filter since then.
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
|
|
|
04-10-2015, 10:05 PM
|
#1654
|
Registered User
Join Date: Sep 2014
Location: santa barbara, CA & Devon, UK
Posts: 316
|
Quote:
Originally Posted by KRAM36
I like your ramps!
Could be the oil hasn't been changed in a while. When I did my first change I had some brownish almost amber looking bits in the filter. Not sure about the black bits. I change the oil every 5k miles and have had nothing in the filter since then.
|
Oil was changed 4800 miles ago - with new IMS.
It was M1 00/40 - I have gone to Liqui Moly 2332 Leichtlauf High Tech 5W-40 this time.
Last edited by njbray; 04-10-2015 at 10:08 PM.
|
|
|
04-12-2015, 07:22 PM
|
#1655
|
2003 S, Arctic Silver, M6
Join Date: Oct 2014
Location: Winnipeg, MB, Canada
Posts: 1,346
|
I did the electrical installation portion of the IMS Guardian. Everything in the dash was done and hooked up to the fuse box. Did an operation test by grounding the detector/oil plug and testing the switch as well as the magnetic contacts. All good. I am now at the point where I have to run the detector/oil plug wire into the engine area. That will be next weekend along with oil sump inspection and oil change. Fun project.
|
|
|
04-13-2015, 05:36 PM
|
#1656
|
Rennzenn
Join Date: Feb 2005
Location: Virginia
Posts: 1,369
|
AX on Sunday. Finished 3rd to a pair of Z06 Vettes.
__________________
Rennzenn
Jfro@rennzenn.com
|
|
|
04-13-2015, 05:48 PM
|
#1657
|
Need For Speed
Join Date: Feb 2013
Location: Funville
Posts: 2,112
|
Quote:
Originally Posted by j.fro
AX on Sunday. Finished 3rd to a pair of Z06 Vettes.
|
Nice job!
Great picture too! I just love the lines of the 986 and with the wheels and tires you have on it, looks beastly!
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
|
|
|
04-13-2015, 07:43 PM
|
#1658
|
Registered User
Join Date: Sep 2014
Location: santa barbara, CA & Devon, UK
Posts: 316
|
Quote:
Originally Posted by KRAM36
I like your ramps!
Could be the oil hasn't been changed in a while. When I did my first change I had some brownish almost amber looking bits in the filter. Not sure about the black bits. I change the oil every 5k miles and have had nothing in the filter since then.
|
I rinsed of the bits from my oil filter - they seem to be dark brown bits. Any ideas what they may be from?
|
|
|
04-13-2015, 07:52 PM
|
#1659
|
Need For Speed
Join Date: Feb 2013
Location: Funville
Posts: 2,112
|
Quote:
Originally Posted by njbray
I rinsed of the bits from my oil filter - they seem to be dark brown bits. Any ideas what they may be from?
|
Could just be bits knocked lose from the IMSB change. Might start your own thread on this. Will attract more experts as I don't think they frequent this thread much.
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
|
|
|
04-14-2015, 01:48 AM
|
#1660
|
Registered User
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
|
If they are hard plastic they are from your chain ramps / wear pads.
To get a better understanding of the amount wear, the next step would be to drop your oil pan and inspect the debris - probably at the next oil change.
Do you have a Durametric to check the camshaft deviation - another indication of ramp wear.
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 02:30 AM.
| |