Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-16-2012, 09:06 AM   #241
Vista glass
 
Vista glass's Avatar
 
Join Date: Jun 2012
Location: Florida
Posts: 88
Garage
Time well spent

I had a few days off finally. Solved CEL for emissions control.Thanks for the postings on that issue. Major cleanup . Did the top with 303 this time to compare to rag top. Clay bar, Swirl remover Finishing glaze, coat of black color match wax, whew! Did the tow eye release cable. Thanks for the great posts on that. Took both front wheels off cleaned and painted rotor head and calipers and lug bolts. Thanks for the posts on that too. Rear wheels are next once I get the wheel locks off and throw them into a well. I think they are welded on. I have read the solutions here and will apply the knowledge when I have replacement lug bolts on hand. Search engine thanks again. Beautiful weather here. I went for a topdown drive to check bolt torque. Took almost 80 miles to be assured all was well.It runs like a scalded dog and looks like a Victoria's secret model.


Let the good times roll!

Vista glass is offline   Reply With Quote
Old 11-16-2012, 09:14 AM   #242
Registered User
 
Heiko's Avatar
 
Join Date: Sep 2012
Location: Guelph, ON
Posts: 981
Garage
Will do as soon as paint is done... I had done a trial fit before i took it in for paint and it fit like a glove... but i will post pics once its done

Quote:
Originally Posted by MN 986 View Post
Be sure to post some pictures of that diffuser once you get it installed. I have been thinking about it since it came out. Let us know if it fit without trimming/modification.

As for today, I took my daughter to school this AM in the Boxster. Top was up at 25deg, but it will be down this weekend as we are supposed to hit 50!
__________________
_________________________________________
Previously owned:
2000 Boxster S 3.2 Ocean Blue / 1974 911 Targa Silver
Heiko is offline   Reply With Quote
Old 11-17-2012, 07:26 AM   #243
2001 Arctic Silver 2.7
 
tony_fury's Avatar
 
Join Date: Jun 2012
Location: Huntington Beach,CA
Posts: 310
Garage
Installed the short shifter. Took a couple of hours and got the cables back in place perfectly.

Went for a nice drive, felt strange at first but after a half hour I love it.
Nice close pattern now, it feels great.

The old shifter in NOT going back on...

Shout out to Meir for taking my call, thanks for letting me bounce a install question off of you..

Anyone considering this mod, take your time and make sure you mark the cable positions with a marker prior to removal. I even took digital pictures to refer to to make sure.

T
Enjoying the new shift, feels great..:dance:
__________________
2001 Boxster - Arctic Silver Metallic
RMS, IMS, 87.5K
tony_fury is offline   Reply With Quote
Old 11-18-2012, 03:54 PM   #244
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Wash and vaccum. Checked everything over. Ready for a practice day on Friday at Willow Springs Big track.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 11-18-2012, 04:14 PM   #245
Registered User
 
Join Date: May 2012
Location: Northern California
Posts: 319
Garage
Quote:
Originally Posted by Vista glass View Post
I had a few days off finally. Solved CEL for emissions control.Thanks for the postings on that issue. Major cleanup . Did the top with 303 this time to compare to rag top. Clay bar, Swirl remover Finishing glaze, coat of black color match wax, whew! Did the tow eye release cable. Thanks for the great posts on that. Took both front wheels off cleaned and painted rotor head and calipers and lug bolts. Thanks for the posts on that too. Rear wheels are next once I get the wheel locks off and throw them into a well. I think they are welded on. I have read the solutions here and will apply the knowledge when I have replacement lug bolts on hand. Search engine thanks again. Beautiful weather here. I went for a topdown drive to check bolt torque. Took almost 80 miles to be assured all was well.It runs like a scalded dog and looks like a Victoria's secret model.


Let the good times roll!
Looks fantastic!!
Bryan topping is offline   Reply With Quote
Old 11-18-2012, 04:41 PM   #246
1999 base
 
Meir's Avatar
 
Join Date: Dec 2011
Location: Coral Springs FL
Posts: 1,617
Garage
Spent another 2 hours, trying to figure out how to add LED bulbs to my DEPO rear lights.
After slicing, cutting, adding relays, adding load resistors.....
I found out the polarity in my car is reversed
No way of having a standard LED bulb to work, without totally rewireng the whole assembly.
So I ended up fixing my neighbor convertible top, and relplaced the rubber trim on my aftermarket speedster humps.
Enjoyed my day after all
Meir is offline   Reply With Quote
Old 11-18-2012, 04:49 PM   #247
Registered User
 
Join Date: Apr 2012
Location: ohio
Posts: 86
Garage
November Ohio sunshine

We went for a drive down Riverview road from Brecksville down to Akron. It's a nice scenic road that parallels the Ohio and Erie canal most of the way. We stopped at an estate sale and found several boxes of wine bottles. We just looked into making wine and needed the bottles. It's amazing how many bottles will fit in the 986 trunks.
rem503 is offline   Reply With Quote
Old 11-18-2012, 05:37 PM   #248
Registered User
 
kjc2050's Avatar
 
Join Date: Oct 2012
Location: Wake Forest, NC
Posts: 867
Garage
Had to run a few errands this morning, and for no good reason other than I want to drive it as much as possible before the snow flies, I took the Boxster. Everything was great until I was approaching a right hand turn from the right lane on a 4 lane street (2 lanes each direction).

The driver of an SUV traveling in the same direction but in the left lane lost interest in staying in her lane and abruptly moved into mine. I was about four feet from her rear bumper and gaining on her at the time. No turn signal, nothing - just turned into my path.

Hit the brakes hard and swerved. She must have glanced in her outside mirror as she made her move, because she abruptly swerved back into her lane as I was skidding to a stop.

It was close. I gathered myself, drove past her, and made my turn. Never - ever - forget to drive defensively!
__________________
2000 Boxster S, 6 speed, Sport Package, Litronics, LED tail lights, LNE IMS-B, OBC, Skybreaker wind deflector, Arctic Silver/Graphite Grey
kjc2050 is offline   Reply With Quote
Old 11-18-2012, 07:40 PM   #249
Registered User
 
Join Date: Oct 2012
Posts: 44
I tore into my first Boxster for the first time today. Its new to me with 79k on the clock so I though I should give it a good once over.

This is my first mid engine car owning/working on. I accessed the engine for the first time today wich was a bit of a dance but thanks to my 101 book I got through it.

While I had the engine cover off I sprayed some orange cleaner and give it all a good wipe. I checked the air cleaner. Cleaned the intake tubes and throttle body, which was gunked up. Installed new oil cooler o-rings.

I climbed under and installed a new engine mount. I left the dust covers off accidently, hopefully not a big deal. While I was under I tracked down a heat shield rattle.

I installed clear side markers.Popped the headlights out to troubleshoot dim lights.Popped out the headlight switch from the dash. I have to order a new one.

I have to say this is a fun car to work on and very well made. all in all a productive weekend. I've got some parts to order and I'm looking forward to next weekend.

Last edited by 0bserver; 11-18-2012 at 07:58 PM.
0bserver is offline   Reply With Quote
Old 11-19-2012, 02:04 AM   #250
Registered User
 
More's Avatar
 
Join Date: Sep 2012
Location: Sydney
Posts: 347


Cracked a rim today Result a blown tire on a motorway thank god I was in the slow lane I'd hate to think what would have happened if I was in the fast lane.

__________________
1998 Porsche Boxster 986 Convertible.

Last edited by More; 11-19-2012 at 02:06 AM.
More is offline   Reply With Quote
Old 11-19-2012, 02:29 AM   #251
Registered User
 
Join Date: Apr 2012
Location: ohio
Posts: 86
Garage
Quote:
Originally Posted by 0bserver View Post
I tore into my first Boxster for the first time today. Its new to me with 79k on the clock so I though I should give it a good once over.

This is my first mid engine car owning/working on. I accessed the engine for the first time today wich was a bit of a dance but thanks to my 101 book I got through it.

While I had the engine cover off I sprayed some orange cleaner and give it all a good wipe. I checked the air cleaner. Cleaned the intake tubes and throttle body, which was gunked up. Installed new oil cooler o-rings.

I climbed under and installed a new engine mount. I left the dust covers off accidently, hopefully not a big deal. While I was under I tracked down a heat shield rattle.

I installed clear side markers.Popped the headlights out to troubleshoot dim lights.Popped out the headlight switch from the dash. I have to order a new one.

I have to say this is a fun car to work on and very well made. all in all a productive weekend. I've got some parts to order and I'm looking forward to next weekend.

From rem503,
Sounds like you had an great time! Nice job. For how buried the engine is on this car, it is amazingly not that hard to do many repairs. The spark plugs on my 4 cyl Ford Ranger were more difficult.
rem503 is offline   Reply With Quote
Old 11-20-2012, 04:02 PM   #252
Registered User
 
schnellman's Avatar
 
Join Date: Oct 2008
Location: Ohio
Posts: 868
Texas Toll Road

Just arrived in TX for the F1.

Last edited by schnellman; 11-24-2012 at 04:35 PM.
schnellman is offline   Reply With Quote
Old 11-23-2012, 12:32 AM   #253
Registered User
 
More's Avatar
 
Join Date: Sep 2012
Location: Sydney
Posts: 347
I bought myself some new Porsche Wheels and 19* Inch Michelin Tires.
To make up for a cracked rim and blown tire I had a few days ago.




__________________
1998 Porsche Boxster 986 Convertible.
More is offline   Reply With Quote
Old 11-23-2012, 05:05 AM   #254
Registered User
 
Join Date: Jan 2008
Location: Pittsburgh
Posts: 143
Put on my hardtop yesterday morning. Later regretted it when the sun was shining and the temperature here (Pittsburgh, PA) was in the low 60s.
linklaw is offline   Reply With Quote
Old 11-23-2012, 11:33 AM   #255
Registered User
 
Join Date: Aug 2012
Location: Indianapolis, In.
Posts: 160
Took to mechanic for Thanksgiving Day CEL.........
__________________
1998 986 with ladder racks.
paintboy is offline   Reply With Quote
Old 11-23-2012, 04:20 PM   #256
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Spent the day racing at Willow Springs Big track. Perfect day - clear, sunny, 75F, light wind, and all of the track time I wanted.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 11-24-2012, 06:13 AM   #257
Registered User
 
Join Date: Nov 2012
Location: 1255
Posts: 4
thank pro huong dan tiep nhe..
nguyenvao525 is offline   Reply With Quote
Old 11-24-2012, 07:34 AM   #258
Newb
 
V-Rod's Avatar
 
Join Date: Nov 2012
Location: MA
Posts: 168
Quote:
Originally Posted by More View Post
I bought myself some new Porsche Wheels and 19* Inch Michelin Tires.
To make up for a cracked rim and blown tire I had a few days ago.




I think that those new wheels look much better than the older ones. Nice look!
V-Rod is offline   Reply With Quote
Old 11-24-2012, 08:52 AM   #259
still plays with cars...
 
BoxsterSteve's Avatar
 
Join Date: May 2011
Location: Baden, ON, Canada
Posts: 1,088
Garage
Quote:
Originally Posted by V-Rod View Post
I think that those new wheels look much better than the older ones. Nice look!
+1 Excellent choice, mate!
__________________
Six speed 2000 Boxster S
Arctic Silver on Metropol Blue | LN Dual Row IMSR | Arctic Silver console, spoiler frame & bumperettes | Crios mod | Technobrace | RoboTop module & modified convertible top relay for one-touch roof operation
BoxsterSteve is offline   Reply With Quote
Old 11-24-2012, 02:59 PM   #260
Ex Esso kid
 
Join Date: Dec 2005
Location: NY
Posts: 1,605
Quote:
Originally Posted by gvtheogioS View Post
Cam on ban da post bai, chuc mot tuan moi vui ve va hanh phuc.
Dien dan chung ta se ngay mot manh me hon.

Maybe you should go do this to yourself Mr spammer

Ghostrider 310 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page