Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-06-2017, 08:09 PM   #3861
Registered User
 
Join Date: May 2015
Location: Greater Seattle, WA
Posts: 534
Drove for the first time in cold weather (3x degrees Fahrenheit) for the first time since changing my manual transmission fluid in my ~120k mile 2001 boxster 2.7 / five speed. Holy moly, rather than shifting stiffly when cold like I was used to, it shifts like butter!! The shift effort improvement after changing the tranny fluid was noticeable enough when warmed up, but now when stone cold on a very cold morning, this was huge, huge improvement!

Also, the defroster on the hardtop I just re-installed last weekend was very nice. Really happy with this the daily driver Boxster on the way in to work this morning!

And I must also add, the hydrophobic quality of the polished and sealed hardtop I put away last spring was still beading water like absolute craziness! I was greeted this morning to probably at least a hundred thousand awesome dewy water droplets in pretty much any size you can imagine from 1" on down...





Edit: and I think we've got to zoom on more on that last picture there, folks... (nice showing in the larger droplet of the lapis blue metallic color flake! )

Attached Images
 
__________________
2001 Boxster

Last edited by jakeru; 11-06-2017 at 08:17 PM.
jakeru is offline   Reply With Quote
Old 11-06-2017, 11:06 PM   #3862
Registered User
 
Join Date: May 2017
Location: Australia
Posts: 7
Short Shifter kit install

Finally finished the machine shop work on my Chinese shifter kit and completed the install. Many thanks to the knowledgeable members of this great community for their experience and generosity. See you on the road!




Bootstrap is offline   Reply With Quote
Old 11-11-2017, 08:34 AM   #3863
Registered User
 
Gjohn3707's Avatar
 
Join Date: Sep 2016
Location: Central PA
Posts: 76
Garage
http://986forum.com/forums/uploads02/20171017_1220041510421429.jpg[/img]
Oil changed, tires at 50psi, battery plugged in.
Attached Images
 
__________________
2001 Seal Grey Boxster Base
Gjohn3707 is offline   Reply With Quote
Old 11-11-2017, 01:06 PM   #3864
Registered User
 
Join Date: Sep 2015
Posts: 57
Garage
Send a message via AIM to philipjayadler Send a message via Yahoo to philipjayadler Send a message via Skype™ to philipjayadler
Quote:
Originally Posted by Starter986 View Post





Finished cleaning the throttle body and MAF. Battery had died (started last Thursday), but a charge fixed that. Was worried about the clamshell properly closing... but everything fit just fine.

Will order the vacuum line for the left side intake sleeve. Arghh.

Next... sleeves and plugs... then AOS.



Wow!!!
What did you use to clean the engine?

Sent from my VS987 using Tapatalk
philipjayadler is offline   Reply With Quote
Old 11-12-2017, 05:01 PM   #3865
Registered User
 
MN 986's Avatar
 
Join Date: May 2008
Location: MN
Posts: 327
Garage
Still getting out there cruising around some local lakes, hopefully for another week or 2 before snow and salted roads are here for the winter. Very comfortable inside with top up and seat heaters on (33degF outside), listening to Vikings postgame after their 38-30 win

MN 986 is offline   Reply With Quote
Old 11-12-2017, 05:28 PM   #3866
2003 Base 5-speed
 
grc0456's Avatar
 
Join Date: Jul 2015
Location: Stoneham, MA
Posts: 949
Garage
Quote:
Originally Posted by MN 986 View Post
Still getting out there cruising around some local lakes, hopefully for another week or 2 before snow and salted roads are here for the winter. Very comfortable inside with top up and seat heaters on (33degF outside), listening to Vikings postgame after their 38-30 win





Lovely B&W shot that really emphasizes the lines of a beautiful car.


Sent from my iPad using Tapatalk
grc0456 is offline   Reply With Quote
Old 11-12-2017, 05:29 PM   #3867
Registered User
 
Ciao's Avatar
 
Join Date: Dec 2015
Location: Denver
Posts: 866
Garage
CV/Pel Filter

Changed oil, filter is clean, but CV boots need repairs
Attached Images
   
__________________
5280 Cruising @High Altitude
Seal Gray & K&N Filter

Last edited by Ciao; 11-12-2017 at 05:35 PM. Reason: add pics
Ciao is offline   Reply With Quote
Old 11-12-2017, 05:43 PM   #3868
2003 Base 5-speed
 
grc0456's Avatar
 
Join Date: Jul 2015
Location: Stoneham, MA
Posts: 949
Garage
Yesterday, we took the car for a nice cruise up the North Shore of Boston, through the NH Seacoast, and into Southern Maine. Chilly, but pretty day. Had given her an end of season exterior detail (wash, clay, machine polish, sealant and wax the weekend before).





Sent from my iPad using Tapatalk
grc0456 is offline   Reply With Quote
Old 11-14-2017, 11:40 PM   #3869
Registered User
 
fridsten's Avatar
 
Join Date: Aug 2015
Location: Stockholm, Sweden
Posts: 265
Finally got my replacement muffler to the welder for modification. Let's hope it works.
fridsten is offline   Reply With Quote
Old 11-15-2017, 12:19 AM   #3870
still plays with cars...
 
BoxsterSteve's Avatar
 
Join Date: May 2011
Location: Baden, ON, Canada
Posts: 1,087
Garage
Quote:
Originally Posted by grc0456 View Post
Yesterday, we took the car for a nice cruise up the North Shore of Boston, through the NH Seacoast, and into Southern Maine.
We were in the area for a week’s holidays in August..
Absolutely beautiful.
Next time will be with the Boxster instead of the family transportation appliance.
__________________
Six speed 2000 Boxster S
Arctic Silver on Metropol Blue | LN Dual Row IMSR | Arctic Silver console, spoiler frame & bumperettes | Crios mod | Technobrace | RoboTop module & modified convertible top relay for one-touch roof operation
BoxsterSteve is offline   Reply With Quote
Old 11-22-2017, 03:14 PM   #3871
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
At the end of October I bent one of my wheels beyond repair. I found one from a 2004 SE with a few gouges and scratches to replace it. I took it to the local tire and wheel place that sends their repairs out to a specialist in PA. They true the wheel, fill any gouges by welding metal, then repaint the wheel inside and out and it looks better than new. I was going to wait until it was time for new tires to have the other 3 wheels refinished, but this wheel came out so nice I decided to have my 3 other wheels done now and dropped them off today. Pictures below are of the wheel I bought and how it looked after repair and refinishing alongside my other front wheel which, although dirty, would not clean up as nicely as the refinished wheel.






PaulE is offline   Reply With Quote
Old 11-22-2017, 04:53 PM   #3872
98 Arctic silver 986
 
tommy583's Avatar
 
Join Date: Jul 2011
Location: Upstate, NY
Posts: 1,441
Garage
Looks great Paul. If you don't mind me asking....how much does something like that cost? You can PM me if you don't want to post it here.
tommy583 is offline   Reply With Quote
Old 11-22-2017, 09:05 PM   #3873
Registered User
 
Join Date: Jun 2017
Location: Visalia, Ca
Posts: 136
What did you do with/to your Boxster today?

Today, I replaced both dash speakers with Kicker 43CSC44's. The improvement
in sound quality, clarity and volume is gigantic. Straight off of the CDR-220 head
unit, no amp, no door or rear speakers.

$27.95 for the pair, a bit of retooling of the factory mounts and done.

Next project will be passenger side window regulator, possibly driver side as well
even though its working fine and not binding. Found a pair for just over $100, new
with a 3 year warranty.

Next project will be replacing the rear mud flaps, one is torn, might as well do both
while I'm at it.

Last edited by RobertKing; 11-22-2017 at 09:06 PM. Reason: word choice
RobertKing is offline   Reply With Quote
Old 11-22-2017, 10:12 PM   #3874
Registered User
 
Join Date: Aug 2016
Location: Norway
Posts: 99
Took it out in the snow. First drive with brand new Goodyear Ultragrip Ice 2, Nordic compund.

Great traction, until you turn the TC off (as you do) for some sideways action.

Nevergrowup is offline   Reply With Quote
Old 11-23-2017, 03:17 PM   #3875
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
Quote:
Originally Posted by tommy583 View Post
Looks great Paul. If you don't mind me asking....how much does something like that cost? You can PM me if you don't want to post it here.
This wheel was $262 which included some truing, some welding and refinishing. Then $25 to mount and balance my tire. The wheel was completely cleaned and painted on the backside and the inside of the rim was painted too. My other 3 wheels need much less work so they should be cheaper!
PaulE is offline   Reply With Quote
Old 11-26-2017, 11:03 PM   #3876
Registered User
 
Join Date: Jun 2017
Location: Visalia, Ca
Posts: 136
What did you do with/to your Boxster today?

Fixed the lock on my fuel filler door by rotating the half moon rubber bushing so that the flat spot faces forward. After that, the latch locked the door down when the car is locked.
RobertKing is offline   Reply With Quote
Old 11-28-2017, 06:08 PM   #3877
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
Not huge mileage by some Forum members’ standards, but i’ve put practically all of these on myself since buying it new in 2003


Last edited by PaulE; 11-28-2017 at 06:14 PM.
PaulE is offline   Reply With Quote
Old 11-29-2017, 07:49 AM   #3878
2003 Base 5-speed
 
grc0456's Avatar
 
Join Date: Jul 2015
Location: Stoneham, MA
Posts: 949
Garage
Congrats, PaulE! Keep on keepin’ on.


Sent from my iPhone using Tapatalk
grc0456 is offline   Reply With Quote
Old 12-01-2017, 10:30 AM   #3879
Registered User
 
redciv1's Avatar
 
Join Date: Jun 2014
Location: Dacula, Georgia
Posts: 264
Walked by it today in the garage enroute to the Sienna for new front tires.
redciv1 is offline   Reply With Quote
Old 12-01-2017, 11:24 AM   #3880
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
I drove mine to work today. Hopefully this weekend I get some time to wash the exterior and find a volunteer to conscript into helping me install the hardtop. Right now my OBC says I have 95 miles to empty and it is about 55 miles to the gas station I'd like to go to which is 5 miles from home and en route. So I will drive conservatively and watch my computer. When I had my 1997 Z3, I once drove home from Lake Placid on a tank of gas and my OBC said it was 8 miles to empty when I finally stopped for gas. I've never taken the Boxster that low. I always think of the old Shell gas commercials when I do this, some of the other older members here might also remember those.

PaulE is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 09:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page