10-31-2011, 04:59 PM
|
#1
|
2001 RUF 3800S
Join Date: Mar 2009
Location: Ontario, Canada
Posts: 326
|
Chunky Brown Sludge in Coolant Tank...
I thought my coolant was low because on the gauge it showed 1/3 full but when i started to fill up brown crap came out of it right away.
First picture show what came out when I initially filled up
Second picture shows the bottom after taking out the coolant
Third shows in the inside wall with the brown gunk caked on
Fill it up with water and sucked it out a few times and the brown crap didnt come off the walls.
As for the last picture it shows new coolant added after "cleaning"
I did research on here and I fear the worse then just a "oil cooler"
How screwed am I?
__________________
IG: RUF3800S
Last edited by violametallic-S-; 10-31-2011 at 05:03 PM.
|
|
|
10-31-2011, 05:28 PM
|
#2
|
Track rat
Join Date: Nov 2006
Location: Southern ID
Posts: 3,701
|
Nasty coolant is never a good sign. Pull your dip stick and see what it looks like. If you have a chocolate milkshake there too, you have lost $$$ in your future. Good luck with your investigation.
__________________
2009 Cayman 2.9L PDK (with a few tweaks)
PCA-GPX Chief Driving Instructor-Ret.
|
|
|
10-31-2011, 05:30 PM
|
#3
|
Registered User
Join Date: Jul 2009
Location: Kansas
Posts: 83
|
I would start with removing oil cooler and taking it to a radiator shop to have it pressure-tested. They will be able to instantly tell you if it has a leak or not.
Good luck
__________________
1983 928 S Euro- fun to work on
2002 Boxster- fun to work on, being able to drive it is a bonus
|
|
|
10-31-2011, 05:39 PM
|
#4
|
Registered User
Join Date: Oct 2011
Location: San Diego
Posts: 111
|
Oh boy, that is UGLY.
Oil in coolant = bad.
|
|
|
10-31-2011, 06:06 PM
|
#5
|
Registered User
Join Date: Oct 2011
Location: Olympia, Wa
Posts: 370
|
my 944 I had coolant looked like that, it was the oil cooler/oil cooler seals
|
|
|
10-31-2011, 06:57 PM
|
#6
|
2001 RUF 3800S
Join Date: Mar 2009
Location: Ontario, Canada
Posts: 326
|
I hope it is the cooler. But have I done any engine damage?
__________________
IG: RUF3800S
|
|
|
10-31-2011, 08:21 PM
|
#7
|
Registered User
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,919
|
Quote:
Originally Posted by violametallic-S-
I hope it is the cooler. But have I done any engine damage?
|
violametallic...
If your engine is not overheating or puffing white smoke and running smooth you probably will be ok.
Once you replace the oil cooler you may want to fill it up only with water, run the engine, drain fill up again, run the engine, drain, etc, etc, until the water comes clean, then fill it again with destilled water and the proper antifreeze mix.
Think optimistic.. :-)
.
|
|
|
10-31-2011, 09:29 PM
|
#8
|
2001 RUF 3800S
Join Date: Mar 2009
Location: Ontario, Canada
Posts: 326
|
Thanks Gilles, engine is running well no over heating or smoke.
im hoping for the best
__________________
IG: RUF3800S
|
|
|
10-31-2011, 09:51 PM
|
#9
|
Registered User
Join Date: Oct 2011
Location: Olympia, Wa
Posts: 370
|
yeah they had to flush the oil and coolant a couple times in my 944 to get rid of all the goop
|
|
|
11-01-2011, 06:34 AM
|
#10
|
Registered User
Join Date: Dec 2010
Location: Hot Springs Village, Arkansas
Posts: 245
|
I've heard of folks using Dawn dishwashing detergent to get rid of oil contamination in the oil system. You'll be an expert in the art of flushing and air venting by the time you're done. The O-ring seals on the oil cooler might be the source if you're lucky. Hate to think it's a head gasket.
|
|
|
11-01-2011, 11:19 AM
|
#11
|
Registered User
Join Date: May 2011
Location: Miami florida
Posts: 1,591
|
Quote:
Originally Posted by violametallic-S-
Thanks Gilles, engine is running well no over heating or smoke.
im hoping for the best
|
Don't drive the car in this condition. I wouldn't even start it. Drain the oil, if there is no water or "milkshake" in it, then there's a good chance its just a failed oil cooler.
__________________
Current car
2000 Boxster 2.7l red/black
Previous cars
1973 Opel Manta
1969(?) Fiat 850 Convertible
1979 Lancia Beta Coupe
1981 Alfa Romeo GTV 6
1985 Alfa Romeo Graduate
1985 Porsche 944
1989 Porsche 944
1981 Triumph TR7
1989 (?) Alfa Romeo Milano
1993 Saab 9000
|
|
|
11-01-2011, 11:50 AM
|
#12
|
Registered User
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,919
|
Quote:
Originally Posted by Dale_K
I've heard of folks using Dawn dishwashing detergent to get rid of oil contamination in the oil system. You'll be an expert in the art of flushing and air venting by the time you're done. The O-ring seals on the oil cooler might be the source if you're lucky. Hate to think it's a head gasket.
|
Violametallic,
I would not use soap...
Actually Prestone has a product called "cooling system flush or radiator flush" that you add to the cooling system and let the engine run for a while to clean all the passages and radiators (open the heater valve)
However, this is an agresive chemical (for prolonged contact with aluminum) that must be neutralized (by another Prestone product) and afterwards to will want to flush several times until your water comes off clean.
It will take you most of the day because every time you add coolant you want the thermostat to be fully open, the good part is that both of the Prestone products will cost you a little over $10 ...
again, good luck!
.
|
|
|
11-01-2011, 08:10 PM
|
#13
|
Registered User
Join Date: Jul 2010
Location: California
Posts: 1,859
|
Not likely to be the oil cooler but the oil cooler seals... They need to be replaced once in awhile. See photo of what happens to them over time (they break-down and crumble).
__________________
Jäger
300K Mile Club
|
|
|
11-04-2011, 05:50 AM
|
#14
|
2001 RUF 3800S
Join Date: Mar 2009
Location: Ontario, Canada
Posts: 326
|
is this something I can fix on my own?
__________________
IG: RUF3800S
|
|
|
11-04-2011, 05:57 AM
|
#15
|
Registered User
Join Date: Dec 2007
Location: Seattle
Posts: 735
|
__________________
2000S Ocean Blue Metallic- 116K
3X Water Pump, Clear side markers, Crios Mod, Front engine mount, Flywheel, clutch, RMS, AOS, MAF, serpentine belt, power brake vacuum line, battery, 2X CV boots, Fuel filter, Oil filler tube, 3X ignition switch, 90K service, gas cap, Coolant tank
|
|
|
11-05-2011, 06:06 PM
|
#16
|
Matt
Join Date: Nov 2011
Location: Colorado
Posts: 284
|
Man that's ugly. Let us know what your dealer says is the problem.
|
|
|
11-10-2011, 12:38 PM
|
#17
|
2001 RUF 3800S
Join Date: Mar 2009
Location: Ontario, Canada
Posts: 326
|
How much would an oil cooler cost me? and where to look?
__________________
IG: RUF3800S
|
|
|
11-10-2011, 01:13 PM
|
#18
|
Registered User
Join Date: Feb 2005
Location: It's a kind of magic.....
Posts: 6,482
|
About $200 or so from Sunset Porsche. Be sure to replace all the orings or you will have leaks.....
__________________
“Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
|
|
|
11-10-2011, 01:31 PM
|
#19
|
Matt
Join Date: Nov 2011
Location: Colorado
Posts: 284
|
Quote:
Originally Posted by violametallic-S-
How much would an oil cooler cost me? and where to look?
|
I get all my parts from the dealership........... where they are installed. No grease under these nails.
|
|
|
11-10-2011, 03:36 PM
|
#20
|
Registered User
Join Date: Oct 2011
Location: Wilmington, NC
Posts: 229
|
Quote:
Originally Posted by MileHighBoxster
I get all my parts from the dealership........... where they are installed. No grease under these nails.
|
No Grease under your nails....hmmm.....good for you and your wallet!
wow!:ah:
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 01:05 AM.
| |