|
I am now staring at my new aftermarket Alpine head unit in the box. I'm scared silly to start cutting wires off that molex connector plugged into the back of my Becker head unit.
My fear is that the wires going to the speakers are coming out of the amplifier and heading straight to the speakers... which means I will have to run new wires to each of the speakers instead of just soldering my wiring harness to the wires in the existing connector.
Am I right or wrong on this?
I thought this was going to be simple, but the Crutchfield tech support guy (who was nice enough to talk to me even though I did not buy anything from them) told me the wires go from the stereo to the amp and then to the speakers.
While this makes all kinds of sense, I still find it odd the way the plugs are in the back of my Becker unit.
Has anyone cut those wires and used a diagram like the one I posted above straight to a wiring harness for an aftermarket unit with success, or did you run new speaker wires to each speaker?
|
Threaded Mode
