Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-13-2011, 04:58 PM   #1
Registered User
 
MN 986's Avatar
 
Join Date: May 2008
Location: MN
Posts: 327
Garage
I just joined the OEM glass rear window club!

I had read this post about putting the 03/04 OEM top onto an older Boxster and I was very interested because I like to drive with the top down from early Spring to late Fall and I have already had to replace a cracked plastic window. I looked every so often but I could not find a 03/04 top, especially at a reasonable price.
A few weeks back I saw an 04 top/frame assembly for sale on eBay from a low mileage car that was being converted to a track car. I bought it and it showed up last week so I had the window tinted and then I put it on this weekend. I followed the excellent directions from Boxtaboy and Schoir (thanks guys!!) and had it done in 3-4 hours without rushing. The latch hook does touch the windstop while closing so (again following Boxtaboy's tip) I will have to adjust the frame back a little, but otherwise it works perfectly.
So far all I have is a cell phone picture.
I would highly recommend this mod to anyone with a plastic window.

On a side note, I will have a 2002 black top/frame (has the headliner) with a 2 year old plastic window for sale. PM me if interested
Attached Images
 
MN 986 is offline   Reply With Quote
Old 03-13-2011, 05:18 PM   #2
Registered User
 
Bobiam's Avatar
 
Join Date: Jun 2007
Location: Unionville, CT
Posts: 442
Lucky break! What did that top and frame cost you, if you don't mind me asking.

Looks good.
__________________
2001 Boxster, GT3 console delete, lower stress bar, RoW M030 suspension package, painted bumperettes.
Bobiam is offline   Reply With Quote
Old 03-14-2011, 04:58 AM   #3
07 Carrera S Cab
 
Boxtaboy's Avatar
 
Join Date: Nov 2005
Location: New Jersey
Posts: 2,273
Garage
Quote:
Originally Posted by MN 986
I had read this post about putting the 03/04 OEM top onto an older Boxster and I was very interested because I like to drive with the top down from early Spring to late Fall and I have already had to replace a cracked plastic window. I looked every so often but I could not find a 03/04 top, especially at a reasonable price.
A few weeks back I saw an 04 top/frame assembly for sale on eBay from a low mileage car that was being converted to a track car. I bought it and it showed up last week so I had the window tinted and then I put it on this weekend. I followed the excellent directions from Boxtaboy and Schoir (thanks guys!!) and had it done in 3-4 hours without rushing. The latch hook does touch the windstop while closing so (again following Boxtaboy's tip) I will have to adjust the frame back a little, but otherwise it works perfectly.
So far all I have is a cell phone picture.
I would highly recommend this mod to anyone with a plastic window.

On a side note, I will have a 2002 black top/frame (has the headliner) with a 2 year old plastic window for sale. PM me if interested
Congrats! It's still my fav mod on my 01 Boxster...
__________________
Current: 07 Carrera S Cab in Midnight Blue

Previous: 01 Boxster in Arctic Silver, 86 944 in Guards Red
Boxtaboy is offline   Reply With Quote
Old 03-14-2011, 07:21 PM   #4
Registered User
 
Join Date: Jan 2008
Location: atl
Posts: 363
wow... so i guess the 03/04 will fit. i was also told that it would ABSOLUTELY not fit. so i was debating on the aftermarket glass windows. also i had concerns of tinting the back window and it getting scatched everytime it's lowered into it's compartment. thoughts?
__________________
-Tuan
tuanle16@juno.com
tuanle16 is offline   Reply With Quote
Old 03-14-2011, 09:12 PM   #5
Registered User
 
MN 986's Avatar
 
Join Date: May 2008
Location: MN
Posts: 327
Garage
tuanle16 -
Yes, it definitely fits! We still have about 20" of snow on the ground so it may be a while before I get to drive it, but I can't wait to raise and lower the top without worrying about the plastic window cracking.

bobiam -
I paid a little over a thousand shipped. There were a couple very small marks on the frame, but they are not very obvious after I touched them up. Other than that the top is in nearly perfect condition.
MN 986 is offline   Reply With Quote
Old 03-15-2011, 06:39 AM   #6
Registered User
 
Join Date: Jan 2008
Location: atl
Posts: 363
great! congrats! looks awesome.

so now i have to start looking for one too. what exactly do i need to ask for? ie..what encompasses the "complete" top so that i don't get it and realize i needed another part.

-tuan
__________________
-Tuan
tuanle16@juno.com
tuanle16 is offline   Reply With Quote
Old 03-15-2011, 06:54 AM   #7
Registered User
 
Join Date: Jun 2007
Location: Freeport, New York
Posts: 472
Quote:
Originally Posted by tuanle16
great! congrats! looks awesome.

so now i have to start looking for one too. what exactly do i need to ask for? ie..what encompasses the "complete" top so that i don't get it and realize i needed another part.

-tuan
Tuan:

All the parts you need (with part numbers) are listed here:

http://sites.google.com/site/mikefocke2/installinga'03-'04glasstopandframeona'97

Regards, Maurice.
schoir is offline   Reply With Quote
Old 03-15-2011, 01:51 PM   #8
Registered User
 
Join Date: Jan 2008
Location: atl
Posts: 363
thanks maurice.
__________________
-Tuan
tuanle16@juno.com
tuanle16 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page