Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 10-16-2008, 04:06 PM   #1
Registered User
 
Join Date: Nov 2006
Location: In the garage...
Posts: 1,737
In a pinch, you can swap a bulbs from either the fog, high, or low beams as all 3 (in halogen set-ups like yours) use the H7 55W bulb.

Additionally, I usually just go ahead and replace the same bulb on the other side. In most circumstances they were put in new at the same time and usually tend to go around the same time (w/in a week or 2). Of course, if you know a specific reason why, other than end of useful life, it failed you can just replace the one.
Burg Boxster is offline   Reply With Quote
Old 04-19-2009, 07:50 AM   #2
Registered User
 
Join Date: Apr 2009
Location: Texarkana, TX
Posts: 9
I joined this forum for this specific problem....no low beams. You guys are very helpful!

I pulled one low beam bulb, checked it with an ohm-meter, it was open (so it was bad). I went to AutoZone, got 2 H7 bulbs, replaced them, and all is good. Took about 25 minutes.

I would always check the bulbs first (with an ohm-meter)....saves time and money.

Thanks to all of you!!

ronev

1999 Boxster, Zenith Blue, Factory Aero Kit.
ronev is offline   Reply With Quote
Old 06-09-2009, 06:49 PM   #3
Registered User
 
Join Date: Jul 2007
Location: atlanta, ga
Posts: 91
Does anyone know what to do if the round clear lens (closest to bulb) gets yellow spot and cracks? What is correct wattage for bulbs? Do I have to get whole new headlamp assemblys? Thanks for any help!
__________________
Richard Griffin
Atlanta GA


2001 blk/tan Boxster 18" turbo twist wheels

2003 gray/tan Navigator
rgriffin is offline   Reply With Quote
Old 08-02-2010, 09:47 AM   #4
Registered User
 
Join Date: Jul 2010
Location: Bedfordshire UK
Posts: 31
Angry Headlight removal tool

Please see my post regarding "bulb replacement".....has anyone else had the hex socket tool explode in their hands, almost slashing their wrists... ...and if so, what did you replace it with? Appreciate some help Guys??
BoxsterDuke is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page