Adding Details to my 986...

[soucorp]

Originally Posted by ArenaRed986

Very inspirational -Great job!! I just picked up the DRL's you recommended- Thanks for sharing!

Thanks and good luck on the LEDs. They look cool but here's a tip, you dont have to remove the front bumper to put them on, but you will need to make a small hole to run the wires into the rubber molded air openings on both sides of the grille as they are tightly fit and sealed off. when you peek a look, you will see what I mean. That rubber can be punctured to get the wire thru. You can get the DRL wiring harness kit that connects to the battery or do as I did and tap the side markers.
Its not hard, take your time, solder correctly and it will work like a charm.

Best