Quote:
Originally Posted by Dllrd23
Pin 3 - K-Lead 11.7V
Pin 7 - K-lead 8.6V
Pin 8 - K-Line 7.5V
Pin 9 - TN Signal - 11.4V
Pin 10 - KVA?? - 8.8V
Pin 12 - Software Voltage?? - 0.4 fluctuating
These are the ones I'm concerned with was wondering if someone had known good values for them.
|
Engine off
Pin 3 - battery
Pin 7 - 7.95V
Pin 8 - 0
Pin 9 - 46mV
Pin 10 - 0
Pin 12 - 0 (ish)
Engine running
Pin 3 - battery
Pin 7 - 8.9V
Pin 8 - 0
Pin 9 - 6.6V
Pin 10 - 0
Pin 12 - 0
Those marked as 0v were low values (0-20mV) which are not much more than what I see with my multimeter connected to nothing at all. So there may be info there, or there may not be.
Dunno if this helps or not
Threaded Mode
