2.7 swap

		986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat
2.7 swap

Garage

LinkBack

Thread Tools

Display Modes

Dllrd23 2.7 swap 01-09-2021, 04:29 AM

78F350 It has been done, but it's... 01-09-2021, 07:09 AM

Dllrd23 Deal included DME for the... 01-09-2021, 01:27 PM

Dllrd23 Made the deal on the 2.7.... 01-10-2021, 06:30 AM

truegearhead Thanks for reaching out over... 01-12-2021, 03:47 PM

truegearhead This is what the hybrid... 01-12-2021, 03:57 PM

Dllrd23 Still plodding along with... 03-11-2022, 03:54 PM

Dllrd23 Injectors from the 2.5 or 2.7... 01-12-2021, 04:56 PM

truegearhead I don’t know, I used the 2.5... 01-13-2021, 03:26 AM

flmont Do you remember how much... 01-14-2021, 05:08 PM

truegearhead Take a look at the photo... 01-15-2021, 09:21 AM

More replies below current depth...

Dllrd23 ‘99 is 97mm ‘02 is 87mm ... 01-25-2021, 02:17 PM

Dllrd23 I mocked up the intake and... 01-30-2021, 11:27 AM

Dllrd23 Did you only use the... 01-24-2021, 11:10 AM

truegearhead I used both, the non-throttle... 01-24-2021, 11:15 AM

Dllrd23 I apologize for what I now... 01-25-2021, 09:29 AM

ike84 I find this fascinating - any... 02-08-2021, 08:45 AM

JFP in PA You need to read up on... 02-08-2021, 09:44 AM

ike84 I'm not sure I understand... 02-08-2021, 12:28 PM

truegearhead We did check AFR during the... 03-27-2021, 05:35 AM

Dllrd23 Progress report 03-28-2021, 06:34 PM

Aanic @truegearhead - I'm much in... 01-26-2021, 08:11 AM

truegearhead Yep that’s it! 01-26-2021, 01:52 PM

Dllrd23 @truegearhead. My 2.5l... 01-30-2021, 11:34 AM

Dllrd23 I just bought some silicone... 01-26-2021, 02:30 PM

Dllrd23 Here is what I learned so... 03-28-2021, 07:08 PM

Dllrd23 Progress Report: Spent a... 01-31-2021, 04:35 AM

truegearhead Nice work! Keep us posted,... 01-31-2021, 04:25 PM

flmont Thanks for the info !! 02-05-2021, 03:59 PM

Aanic Hey Dllrd23, any progress in... 03-23-2021, 04:49 AM

Dllrd23 More to come Sunday. Have... 03-27-2021, 04:54 AM

Aanic Thanks for the update and... 03-29-2021, 04:09 AM

Dllrd23 Porsche Boxster IMS bearing... 04-02-2021, 01:01 PM

Dllrd23 Locking the cams down 04-07-2021, 07:58 AM

Dllrd23 Part 4 ... 05-13-2021, 11:36 AM

Aanic Dllrd23, Where'd you end... 09-27-2021, 04:00 AM

Dllrd23 Summer and knee surgery... 12-16-2021, 11:42 AM

Dllrd23 Part 5 ... 01-25-2022, 03:42 PM

Dllrd23 Part 6 ... 01-25-2022, 03:43 PM

Dllrd23 Part 7. Correcting mistakes... 01-25-2022, 03:45 PM

TheBird When using the 2.7 intake... 03-03-2022, 09:50 AM

TheBird Using the 2.7 intake and... 03-03-2022, 09:57 AM

Quadcammer Throttle cable works fine and... 03-12-2022, 05:34 AM

Dllrd23 Thanks for the info and the... 03-12-2022, 10:07 AM

Dllrd23 couple of short videos on... 03-27-2022, 12:38 PM

01-09-2021, 04:29 AM

Dllrd23

Registered User

Join Date: Aug 2020

Location: Wheeling, West Virginia

Posts: 90

Garage

2.7 swap

I have the opportunity to “steal” a complete powertrain from an 02 Boxster harness and all trans, mounts, computers. Everything but the tip for the trans. I can get it all for less money and time than rebuilding my basket case 99 with 5 speed and I’ll have a spare trans for my other 99. Question is what problems could I run in to? I already know that I have to deal with a vac line problem if I’m to bolt up the 5 speed to the engine that was previously an auto. Looking for any advise available.

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

All times are GMT -8. The time now is 09:33 AM.