Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-07-2017, 03:33 AM   #1
Project Addicted
 
jcslocum's Avatar
 
Join Date: Aug 2015
Location: Eastern Shore, MD
Posts: 623
Is there any water in the oil???

My oil cooler failed and allowed water into the coolant but no coolant made it into the oil. As mentioned above, the S oil cooler is about 2x bigger than the base and bolts right on. The oil cooler is on the drivers side (USA) of the engine kinda of under the intake. Easy to take off and check/change.

That is the new S cooler installed:





Oil on 1 side, water on the other. It was very easy to apply a small bit of air pressure and see the bubbles. I recall the relief when the bubbles showed.

__________________
______
Jon
1966 912, 1976 911
1986 944, 2000 Boxster
jcslocum is offline   Reply With Quote
Old 03-07-2017, 05:18 AM   #2
Registered User
 
Join Date: May 2014
Location: Tunbridge Wells
Posts: 7
Thanks for your comments and pics they are most helpful. I am not running the car at the moment as a precaution and Porsche are going to pressure test the coolant system next week. Fingers crossed it's just the oil cooler!
gerlad is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page