Quote:
Originally Posted by Acast94
Alright I have come up with a final set up for the rears.
275/30R19 with a 20mm spacer
in the fronts I want to run 235/35R19 but the biggest spacer I can run is a 10mm
a 10mm spacer will put me flush against the fender for the face of the wheels but I will have an inset of 19mm
In other words these new wheels will stick into the suspension parts 19mm more than stock
Is that too much? Can I get away with this setup and not damage anything
|
Only way to know that is to get behind the wheel and measure back to the struts.
Threaded Mode
