03-28-2016, 07:13 AM
|
#1
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
HELP! Big coolant leak!!
I've just parked up in a supermarket and turned the engine off. Then I heard a sound that sounded like water gushing. Looked under the rear to find coolant (I think) spilling from the car:
I took a quick look where it was coming from, and it's coming from this pipe behind the rear right wheel (US passenger, UK driver):
What the hell is going on? I'm sat in the car waiting for a recovery truck to take me home as I'm worried about starting the engine.
Is that pipe supposed to be connected to something? I'm 90% it's coolant but it could be brake fluid. But then again, the brakes feel completely rock solid here with the engine off, so it can't be that?
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
Last edited by geraintthomas; 03-28-2016 at 07:15 AM.
|
|
|
03-28-2016, 07:41 AM
|
#2
|
Motorist & Coffee Drinker
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,677
|
It looks like either the coolant tank cap has a leak, or there is a leak in some portion of the tank. That tube in the picture is where the coolant tank drains if fluid leaks out in the top portion.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
|
|
|
03-28-2016, 07:46 AM
|
#3
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
So the top portion being where the coolant and oil cap is? It was wet around there when I opened the boot.
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
|
|
|
03-28-2016, 07:55 AM
|
#4
|
Registered User
Join Date: Dec 2013
Location: Greenville, S.C.
Posts: 2,670
|
Pop the trunk and see if the level is normal?
|
|
|
03-28-2016, 07:55 AM
|
#5
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
It's not, it's very low.
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
|
|
|
03-28-2016, 07:56 AM
|
#6
|
Registered User
Join Date: Sep 2012
Location: S. New Jersey
Posts: 1,239
|
The hose is the Coolant tank overflow.
Connected to side of tank behind carpet but if it was wet around cap could be cap is old version and has gone bad, loose cap. Could be over filled as well
__________________
2002 S - old school third pedal
Seal Grey
|
|
|
03-28-2016, 07:57 AM
|
#7
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
I haven't touched the coolant since I've had the car in November. The cap doesn't appear to be bad though? It could it still be bad even if it's visibly fine?
Thanks for the quick replies guys, I really appreciate it. I'm still waiting for a recovery.
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
|
|
|
03-28-2016, 08:05 AM
|
#8
|
Registered User
Join Date: Sep 2012
Location: S. New Jersey
Posts: 1,239
|
I believe newer cap ends with 04. Yes like most things it could be bad but not viable to the eye. Dried/damaged rubber o-ring.
What was the Temp gauge doing as you drove?
__________________
2002 S - old school third pedal
Seal Grey
|
|
|
03-28-2016, 08:08 AM
|
#9
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
996.106.447.01
That's the cap number. I didn't recognise it doing anything, it literally started to leak when I reversed into a car park space.
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
|
|
|
03-28-2016, 08:17 AM
|
#10
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
If it was the tank that was cracked, would the boot carpet be wet? Mines dry, it was just around the lid that seemed wet.
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
|
|
|
03-28-2016, 08:46 AM
|
#11
|
Registered User
Join Date: Oct 2014
Location: California Central Coast
Posts: 1,476
|
Quote:
Originally Posted by geraintthomas
996.106.447.01
That's the cap number. I didn't recognise it doing anything, it literally started to leak when I reversed into a car park space.
|
You have an old cap. Replace with one ending in .04.
Quote:
Originally Posted by geraintthomas
If it was the tank that was cracked, would the boot carpet be wet? Mines dry, it was just around the lid that seemed wet.
|
Yes, if tank is bad it will leak into the trunk. Since yours in in the fill/drain area it is most likely the old cap or could be the release valve. I'd replace the cap.
|
|
|
03-28-2016, 08:49 AM
|
#12
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
Right okay. Could you give more information about this release valve, where it can be found and what I'd have to do to replace it if it's bad?
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
|
|
|
03-28-2016, 08:51 AM
|
#13
|
Registered User
Join Date: Sep 2012
Location: S. New Jersey
Posts: 1,239
|
That is old cap version
Under my trunk carpet is a foam floor insert so my carpet never got wet when my tank went
You would need to lift all that to see if coolant is laying around
|
|
|
03-28-2016, 08:54 AM
|
#14
|
Registered User
Join Date: Oct 2014
Location: California Central Coast
Posts: 1,476
|
Quote:
Originally Posted by geraintthomas
Right okay. Could you give more information about this release valve, where it can be found and what I'd have to do to replace it if it's bad?
|
Ahh. Pull the oil cap and coolant tank caps off. Then pull the flat plastic trim plate off, May need a flat screwdriver to help lift one corner. Underneath that cover is a wire bail that you lift to release air in the system when filling the coolant system. Search filling the cooling system for more info. Will need to be done with the loss of coolant in reservoir.
|
|
|
03-28-2016, 08:56 AM
|
#15
|
Registered User
Join Date: Sep 2012
Location: S. New Jersey
Posts: 1,239
|
Pull up plastic cover that sits on top of coolant tank but under filler caps. Then you will see the purge valve mechanism. A metal handle that tilts to keep valve open surrounded by screws
|
|
|
03-28-2016, 10:05 AM
|
#16
|
Registered User
Join Date: Nov 2013
Location: Wisconsin
Posts: 35
|
My 98 has intermittent issues last summer with belching coolant out of the overflow. I opened the purge, carried distilled water for a week, and eventually the air worked out of the system.
I had my water pump replaced and there was an air pocket hiding somewhere. The overflow issue was intermittent, and didn't manifest immediately afterward.
Try running the purge open for a few good heat cycles.
__________________
16 Focus ST
14 BRZ
00 Ducati ST2
|
|
|
03-28-2016, 11:26 AM
|
#17
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
Interesting! At least it's not a huge issue.
The water was really gushing out of he overflow for at least 10-20 seconds before it started to stop. Would that still be down to a bad cap?
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
|
|
|
03-28-2016, 01:54 PM
|
#18
|
Registered User
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
|
Yes.
The cap is probably leaking - when the coolant cools the leaking cap allows air into the system. When you restart the car, the air expands and forced coolant out through the overflow - which is what you have.
1) Replace cap as suggested above.
2) Top up coolant with distilled water / Porsche coolant 50/50 mix.
3) Open the purge valve D shaped lever for at least 3 x heat cycles of the engine or for a few days. This allows air to be expelled.
4) Top up the coolant tank each morning as the level will drop as air is expelled.
5) If the air is getting to the system because your tank is cracked, you will see moisture under the carpet in the boot.
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
|
|
|
03-28-2016, 03:02 PM
|
#19
|
Registered User
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
|
Quote:
Originally Posted by Steve Tinker
3) Open the purge valve D shaped lever for at least 3 x heat cycles of the engine or for a few days. This allows air to be expelled.
|
Thanks for the info. Can you tell me how to do this, and how it works?
__________________
Porsche Boxster S Type 986
Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
|
|
|
03-29-2016, 12:28 AM
|
#20
|
Registered User
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
|
When you remove the coolant cap and oil fill cap, prize up the plastic cover and underneath there is a round valve with a chrome D shaped lever attached. Just lift the lever into the vertical position and leave it there for a couple of days or 3-4 complete heat cycles (cold to full temp). After each run and then cooldown (say overnight) you will probably find the coolant level has dropped as the air is purged. Top up as required with the correct mix of correct coolant.
If you are still not sure, use the search function for pictures - it works quite well believe it or not....
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 01:01 AM.
| |