Why don't My Secondary Air Injection Components Look Like This?

[KRAM36]

Got this off a Pelican vacuum hose write up.

air intake/vacuum line routing - Pelican Parts Technical BBS

A- Fuel rail
B- Intake rubber sleeve with vacuum port (installed on the right side of throttle body)
C- Fuel pressure regulator on fuel rail
D- Air injection pump valve
E- Electronic vacuum solenoid valve for air injection pump valve
F- Vacuum reservoir
G- Four-way vacuum tee
H- Vacuum check valve (black side points toward the manifold)
I- Three-way vacuum tee (one side is plugged)
J- Electronic vacuum solenoid valve for resonance flap valve
K- Resonance flap valve
L- Intake rubber sleeve with vacuum port (installed on left side of throttle body)

It looks like it goes to E.

So where do I buy the vacuum line from?