Pic please of top of engine

[RoadsideStig]

Does anyone know what the sensor just right of the vacuum reservoir is? Goes deep into the block and looks similar to a knock sensor?

[pjq]

probably the oil level/oil temp sensor.

[RoadsideStig]

That's what I thought, but there's a bolt that holds it in place.

Here's a picture!

[pjq]

Ah sh** Bypro, if I run the car hard enough can I burn off that light layer of paint.
The cars temp gauge is running about 5 degree cooler than before the rebuild. I did put in the 160 thermostat.

[pjq]

Roadside Stig, how about your oil dip stick.

[pjq]

Just thinking again ByPro, considering heat dissipation how much worst is the paint on the engine compared to an engine covered with dirt and grime?

[BYprodriver]

Originally Posted by pjq

Ah sh** Bypro, if I run the car hard enough can I burn off that light layer of paint.
The cars temp gauge is running about 5 degree cooler than before the rebuild. I did put in the 160 thermostat.

I wouldn't do anything, the LN sleeves reduce friction so it runs cooler. In Canada the paint may help prevent corrosion, but I wouldn't worry about it.