Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-21-2013, 07:30 AM   #1
Registered User
 
Join Date: Jun 2012
Location: Ontario,Canada
Posts: 84
Pedros Techno DOF IMS fix?

I have an 06 Boxster S and seriously considering getting this kit and having my porsche
shop install it,i have about 60k now and no problems yet atleast that i am aware off.
My only concern is with fairly new technology sometimes there are issues that arise down the road that without tons off miles ect may occur.I have a concern that i would like som feed back on.If there is about 60 psi off pressurized oil shooting into the bearings one side(with seal removed) is there any chance that the other inside seal could be forced out or particially out enough by oil pressure,if that was even possible that would be the kiss of death as that oil would burn up in the shaft tube,become acid ect and cause the bearings to pit and blow even faster.Any thoughts on this. Also for those that have done it,what should i expect in terms off cost for the procedure of install.Thx
moresquirt is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page