Wheel spacers

[Bfan]

JD why do you think they are so horrible. They look quet smart to me, I think they will do the job of centring the wheel, even on a thin spacer with this design

[Johnny Danger]

Originally Posted by Bfan

JD why do you think they are so horrible. They look quet smart to me, I think they will do the job of centring the wheel, even on a thin spacer with this design

They're not bolt centric, nor does it appear as though they countersink to the hub.

[Kenny Boxster]

Originally Posted by Johnny Danger

They're not bolt centric, nor does it appear as though they countersink to the hub.

+1, Looks concerning.

[lmw]

hey guys new to this forum, and dont have much experience with wheel spacers

got two questions for JD

1. what do you mean by countersunk to the hub. I see on the back of the spacers the is a countersink on the inside diameter, is this what you are talking about?

2. Do they have to be bolt-centric if the hub-centric fingers on the spacer lock into place with fingers on the hub, which would not allow the spacers to move?

I guess I dont understand why they need to be bolt-centric if the are hub-centric

[Johnny Danger]

Originally Posted by lmw

hey guys new to this forum, and dont have much experience with wheel spacers

got two questions for JD

1. what do you mean by countersunk to the hub. I see on the back of the spacers the is a countersink on the inside diameter, is this what you are talking about?

2. Do they have to be bolt-centric if the hub-centric fingers on the spacer lock into place with fingers on the hub, which would not allow the spacers to move?

I guess I dont understand why they need to be bolt-centric if the are hub-centric

The spacers should be machined in a way that the bolt openings match with Porsche's 130x5 specification. This ensures that the spacer and wheel cannot move under force. In addition, it's ideal to have the spacer mount securely to the hub. That way, instead of the spacer spinning while you're trying to line up the bolt openings of the wheels with those of the hub, it stays in place.

[lmw]

Originally Posted by Johnny Danger

The spacers should be machined in a way that the bolt openings match with Porsche's 130x5 specification. This ensures that the spacer and wheel cannot move under force. In addition, it's ideal to have the spacer mount securely to the hub. That way, instead of the spacer spinning while you're trying to line up the bolt openings of the wheels with those of the hub, it stays in place.

I found this image on the website, it looks to me like the fingers ,or whatever you call them, that make the spacer hub-centric, match and lock the spacer into place with the hub not allowing it to spin.

Is it really possible for the spacer to spin under load even with the wheel torqued down properly. The wheel is mounted using the studs which go to the hub so the wheel cant really spin under load if correct lugs are used correct? doesn't that mean that the spacer would not be able to or have no reason to spin? there is no torsional load being applied to the spacer other than what the wheel is putting on the spacer, so any spinning that would happen would happen regardless if the spacer were there on not?



The reason I am asking is I am looking at these for my track 986, and there are a lot of crappy wheel spacers out there and it seems everyone has different views on the subject.

[Johnny Danger]

Originally Posted by lmw

I found this image on the website, it looks to me like the fingers ,or whatever you call them, that make the spacer hub-centric, match and lock the spacer into place with the hub not allowing it to spin.

Is it really possible for the spacer to spin under load even with the wheel torqued down properly. The wheel is mounted using the studs which go to the hub so the wheel cant really spin under load if correct lugs are used correct? doesn't that mean that the spacer would not be able to or have no reason to spin? there is no torsional load being applied to the spacer other than what the wheel is putting on the spacer, so any spinning that would happen would happen regardless if the spacer were there on not?



The reason I am asking is I am looking at these for my track 986, and there are a lot of crappy wheel spacers out there and it seems everyone has different views on the subject.

I have no idea what that image is. But, in any case, I think you're making this issue far more complicated than it needs to be. Imagine having a wheel, that instead of having lugs that are correctly match to the hub specification (i.e.. bolt pattern), but rather there were a series of elongated slots to mount the wheel to the hub. What would effectively hold the wheel in place ? Certainly not the torque of the lugs bolts alone. Furthermore, if neither the wheel or spacer has a center bore that's specific to the hub's center bore, then the interface between the two will not be hubcentric. Same principles hold true for the spacer. The spacer essentially acts as an extension of the wheel/hub in order to augment offset. Beyond using a 7mm spacer or so, there's no longer enough exposure of the hub for the wheel to effectively seat. Therefore, a properly designed spacer will have a hubcentric collar that acts as an extension of the hub so the wheel will interface correctly. The machined countersink tap is a nice touch that more or less keeps the spacer in place so it's not moving while you're trying to line up the wheel and hub.

[Johnny Danger]

Originally Posted by lmw

I found this image on the website, it looks to me like the fingers ,or whatever you call them, that make the spacer hub-centric, match and lock the spacer into place with the hub not allowing it to spin.

Is it really possible for the spacer to spin under load even with the wheel torqued down properly. The wheel is mounted using the studs which go to the hub so the wheel cant really spin under load if correct lugs are used correct? doesn't that mean that the spacer would not be able to or have no reason to spin? there is no torsional load being applied to the spacer other than what the wheel is putting on the spacer, so any spinning that would happen would happen regardless if the spacer were there on not?



The reason I am asking is I am looking at these for my track 986, and there are a lot of crappy wheel spacers out there and it seems everyone has different views on the subject.

I would much rather utilize a spacer that was both bolt centric and hub centric, than one that relied on "fingers" alone. Your choice.

[porshaowner]

john you are a perfect example of why some people should not post in a forum when they lack the technical prerequisite for the design of such a part that brey krause has made thank you brey krause for filling that need, unbelievable!!!!




Danger;333386]The spacers should be machined in a way that the bolt openings match with Porsche's 130x5 specification. This ensures that the spacer and wheel cannot move under force. In addition, it's ideal to have the spacer mount securely to the hub. That way, instead of the spacer spinning while you're trying to line up the bolt openings of the wheels with those of the hub, it stays in place.[/QUOTE]

[Johnny Danger]

Originally Posted by porshaowner

john you are a perfect example of why some people should not post in a forum when they lack the technical prerequisite for the design of such a part that brey krause has made thank you brey krause for filling that need, unbelievable!!!!




Danger;333386]The spacers should be machined in a way that the bolt openings match with Porsche's 130x5 specification. This ensures that the spacer and wheel cannot move under force. In addition, it's ideal to have the spacer mount securely to the hub. That way, instead of the spacer spinning while you're trying to line up the bolt openings of the wheels with those of the hub, it stays in place.

[/QUOTE]

Who's this jackass ?