Quote:
Originally Posted by Mikluuutus
Just got mine from the post office. It's got install instructions like this:
Couple of questions.
1. Do I just use Fig 3 negative trigger? So in my case I would have to attach Blue and Yellow/Black wires to the cars ground and Brown to cars Brown/white and Yellow to cars Brown/red?
2. Where I can get easily +12v in the car?
3. How about the trunk actuator? There is only Trunk release output (Purple). Do you know to where I should attach that in the car? And how do I know if it is positive or negative output? I think it might be positive so I would need a relay there.
Big thanks to you guys in advance! |
Hello, I know it's an old thread but the wiring colors on mine are the same as the ones in this post. Does anyone know how it should be wired? I got the parking lights to work properly but that's it, it's not locking or unlocking. I probably have it wired wrong. If the immobilizer isn't working correctly would that matter? I don't think it would but just checking. I had mine repaired but who knows, if it's really working correctly. Any help is appreciated.
Threaded Mode
