Ball bearing short shifter !

[Ben006]

Hi guys !

I finally found the time to install the prototype for the L shaped lever !

It works great !
I'll drive it for a while to verify that the concept works, then the final product will be made out of aluminum with a removable insert to suit the shifter's side ball.

Here is the before/after video : https://youtu.be/qrJdOKEiz-o

The first part of the video shows that a lot of side-to-side movement is lost in play in the L shaped lever. Second part of the video shows the prototype installed, and all the side-to-side movement being transmitted to the shift cable !


Ben.

[tommy583]

Looks Great Ben. I have one of your shifters and have found after a couple years I have side to side play I can't rid of. Looking forward to getting this new part. Put me on the list for one when you start making them.

[maytag]

Originally Posted by tommy583

Looks Great Ben. I have one of your shifters and have found after a couple years I have side to side play I can't rid of. Looking forward to getting this new part. Put me on the list for one when you start making them.

Plus one! Put me on the list too!

Sent from my SM-G930T using Tapatalk

[grc0456]

Originally Posted by tommy583

Looks Great Ben. I have one of your shifters and have found after a couple years I have side to side play I can't rid of. Looking forward to getting this new part. Put me on the list for one when you start making them.

Likewise!


Sent from my iPhone using Tapatalk

[Troy.Boxster]

I'm good for one as well!