OBC addition Cables

[rfuerst911sc]

Dwight I sent you an email .

[rfuerst911sc]

I want to post a follow up to my buying experience with Dwight . I purchased one of his cables about three weeks ago, he's in AL. and I am in Georgia. He sent me an email letting me know when he shipped. Over a week went by and nothing showed up in the mail. I sent Dwight an email letting him know it had not arrived. We agreed to wait three more days and I should get back to him. Three days went by and no cable showed up. He made up another one and shipped it out immediately. Guess what happened ? Both cables showed up on the same day ! It was obvious the first cable shipped sat in a post office somewhere for a long time without being looked at or moved. The bottom line of my story is Dwight was/is a stand up guy that backed up the sale with a 2nd shipment, it was NOT his fault USPS messed up the 1st shipment. I have contacted Dwight and will be shipping one of the cables back so he can help someone else in the future.

Thanks Dwight

[Pdwight]

I always treat people the way I want to be treated, many of our follow Boxster enthusiasts have helped me with many projects with Tools, parts you name it. I think all this good Karma will come back to help us all.

Good luck with that install and let me know if I can help in any way

Sincerely

Dwight

[Dave80GTSi]

Been reading a lot on this topic, and have found conflicting info as to the number of dash switches required.

Pelican tutorial says that two switches are required. But reading thru this thread, several folks mention using only one.

Can someone please walk me thru this?

For both cases, what happens, exactly, when the various switches are pressed? Which switch does what?

Thanks - DM

[Pdwight]

I have made many OBC harnesses for a single switch and a few for two switches. I have never installed anything but the 4 Stalk assembly but I can add some data. A single switch will only let you step through the various views.....Temperature , MPG etc

Two switches should let you emulate a 4 Stalk and set the speed gong and reset some options....personally the 4 Stalk assemble just is not that expensive and I would go with what looks factory. 4 Stalks come up quite often for sale for under $150

[Meir]

adding a switch like that, to the same location of the 4th stalk, can be also a very interesting option.

https://www.amazon.com/TmallTech-Switch-Position-Contacts-Momentary/dp/B018JNFXT2/ref=sr_1_1?ie=UTF8&qid=1478632142&sr=8-1&keywords=4+positions+momentary+switch

https://www.amazon.com/0-6A-125V-Latching-Joystick-Switch/dp/B009N83ATI/ref=pd_day0_60_8?ie=UTF8&pd_rd_i=B009N83ATI&pd_rd_r=NZJXRNHQAG4M07G887R2&pd_rd_w=vHZVW&pd_rd_wg=r69v7&psc=1&refRID=NZJXRNHQAG4M07G887R2

[Balloonmeister]

Dwight,
I sent you a PM asking if you're still making the harnesses.
Thanx,