OBC addition Cables

[rj.thomas93]

Yes, I think so. So that would be 4 signal and 1 ground leads?
Yes push on crimps are great for the switch end.

Originally Posted by Pdwight

Yes, I am still making these. So you want 5 conductors with leads for two switches ?

Would you simply like push on female crimp connectors (I will of course solder as well as crimp)

[Pdwight]

Paypal me $45 as a gift , let me know the year Boxster and I can get you one out in a frew days...since you are doing switches and not a 4 stalk I will make the harness a few extra inches longer to give you some wiggle room for hookup

[rj.thomas93]

Sent it over. Thank you. Also sent a pm

[Pdwight]

Originally Posted by rj.thomas93

Sent it over. Thank you. Also sent a pm

Please PM me the year make of your Boxster

Thanks
Dwight

[winter.k]

removed - accidental post

[M3driver]

PM sent, I'm interested if you are still doing them

[BER]

I purchased a nice 2001 Base Boxster just about a year ago. The OBC and Cruise Control were not activated. I recently picked up a re-conditioned Durametric Pro from Durametric. Very impressive and powerful tool.

I plan to hack the OBC and Cruise Control modules. I currently just have the 2-stalk switches on my steering column (i.e. wipers and turn signals); I will remove the 2 stalk switch and install the 4-stalk version. I know some folks use a panel mounted rocker switch for the OBC, but I like the OE look with the switches on the steering column.

I have contacted Dwight about purchasing one of his quality wiring harnesses for the OBC. I will make the Cruise harness myself.

Apparently there is an excellent guide to the OBC hack that was written by Joeisf (sp). Does anybody have a link, or a copy, to his hack instructions? That would be much appreciated. Thanks.