OBC addition Cables

[BruceH]

[QUOTE=eicheldp;437258]

Originally Posted by KRAM36

4 Stalk is in and functioning perfectly. Thanks for the killer wire harness Pdwight!

Hi Kram,

I'm in the process of doing the same on mine using Pdwight's harness. My question, where did you find the shroud where the stalks protrude?

Or did you dremel the lower hole?

The rubber shroud has pre marked indentations on the back side. All you need is a utility or exacto knife to cut it out.

[eicheldp]

[QUOTE=BruceH;437262]

Originally Posted by eicheldp

The rubber shroud has pre marked indentations on the back side. All you need is a utility or exacto knife to cut it out.

Thanks Bruce,

I have the harness & the stalk, it's just to darn cold to work in the garage!

BTW Top speed came through on the same deal and I bought the test pipes. Thank you for that tip as well.

Don

[KRAM36]

[QUOTE=eicheldp;437267]

Originally Posted by BruceH

Thanks Bruce,

I have the harness & the stalk, it's just to darn cold to work in the garage!

BTW Top speed came through on the same deal and I bought the test pipes. Thank you for that tip as well.

Don

I forgot to mention I bought this because my turn signal broke. I was looking at the 3 stalk to replace mine and found that one. Sure glad I got it and the wire harness from Pdwight, which made it such an easy mod. He even includes directions of where to plug everything in at.

[BruceH]

[QUOTE=eicheldp;437267]

Originally Posted by BruceH

Thanks Bruce,

I have the harness & the stalk, it's just to darn cold to work in the garage!

BTW Top speed came through on the same deal and I bought the test pipes. Thank you for that tip as well.

Don

No problem Don! Even here in Texas I am tired of this winter already, way too cold. I moved down here from the North to get away from cold weather! You will like the results of both projects! Hopefully you can get in the garage soon

Bruce