Porsche Headlight Retrofit [from CAD, prototyping to finish)

[particlewave]

If you had the dim fade out or partial halo loss, most likely the LED has failed. The only way to fix is to replace the projector.
Being fully integrated into the projector means that they are not replaceable/serviceable.

[glenf]

Originally Posted by particlewave

If you had the dim fade out or partial halo loss, most likely the LED has failed. The only way to fix is to replace the projector.
Being fully integrated into the projector means that they are not replaceable/serviceable.

Hello Particlewave,

since you are the Yoda of these kits, I just have another question for you.

I am leaning on this install but am wondering when the kit is installed and lights need to be changed is this possible to service and replace light in projector?

Thank you for your help
G

[mipstien]

Originally Posted by glenf

Hello Particlewave,

since you are the Yoda of these kits, I just have another question for you.

I am leaning on this install but am wondering when the kit is installed and lights need to be changed is this possible to service and replace light in projector?

Thank you for your help
G

You will replace them the same way as other bulbs but just attach them to the HID ballast instead. they basically screw in the same hole as the top headlight bulb is in now and then you replace them through the same way as before.