(
< Bruce, Dave, Coaster, JayKay, some comments left for you on previous page.)
New Projectors Styles - The new family!
This thread and the support from members of 986forum have given me invaluable inspiration throughout the life and development of this projector. The interest, the demand, satisfaction and enthusiasms, have made me realized that there were a demand to bring this product to its next level. So.... I did!
Most importantly and before going any further, I would like to thanks everyone who have shown interest in the kit and to those who've purchased it from Charles or myself (very special thanks to you). Without all of you guys, 986forum, this would NOT have been possible. So thanks x100 again, I'll forever be grateful to all of you here
Once a personal idea meant to mimic the front-end of a half-million dollar car, some could now call it The Ultimate Halogen-to-HID headlight retrofit kit for sport & super cars series. While keeping up to the theme of this thread, i.e. sharing, and without any further due (apologies to those who've been waiting), here goes some previews of what I am rumbling about.
The final High Performance Bi-Xenon Projector Series (2014 models lol).
All of the models are sharing the same dotted angel eyes concept and most technical features and performance identical to the classic CGT style projector. With few cosmetic exceptions and design revisions however:
1. The lens is now secured with a retaining ring. Machined in house and made of POM material (Delrin)
2. Angel eyes now mounted on the lens' retaining ring
3. The LED diffuser are also machined in-house using clear PMMA (Acrylic, frosted filter effect)
4. 15% weight reduction using thin wall thickness machining techniques, and less filling chemicals. Total assembly now only weight total 338 grams
5. Transient thermal analysis simulation, R&D and tests have been carried. Thermal management vs material properties (AE hotspots avoidance, heat dissipation tests)
6. And finally, each design have been given a name
^ Although the kit remains fully customizable (anodizing colors, laser script, etc), that is how they are going to be branded and laser-scripted by default. The Gunmetal is also the default color. Less the chemical green LEDs of course
ps. this green is what I prefer using for 3D renderings!
. Just received an email from the vendor he has conducted pull tests ( didn't know this was needed ) on the satoprene and he's very happy with the results. Apparently next he's going to try silicone. Then the next will be a harder material, this harder material would drastically reduce the tooling costs. So this R&D is moving forward and he believes by late next week he " may " decide the material he is going to move forward with. I'm quite excited by the progress to date but looking forward to having some prototypes in my hands !
)
Hybrid Mode
