Quote:
Originally Posted by nieuwhzn
Using the sample program to flash the LED and stick the board in the bezel?
Or do something more complicated like having the LEDs in the angle eyes chasing each other?
|
I want to try and create a breathing LED that is tied to the security LED so that when the security is armed a single red LED will illuminate the inside of the Projector cavity and the result should be a dim glowing pulsating "Breathing" visible in the projector lens.
Seeing as I already have some TI ez430-2012 boards left over from my GoPro RF remote shutter project I figured it would be a fun little project to create "Dragon Eyes".
I have some C code for the TI 2012 Micro Processor that will slowly increase/decrease the brightness of a LED in a rythmic pattern to produce the "Breathing".
Angels eyes are old news and I don't want my Porsche to look like a Beamer so time for something new
.
__________________
"It broke because it wants to be Upgraded
"
2012 Porsche Performance Driving School - SanDiego region
2001 Boxster S, Top Speed muffler, (Fred's) Mini Morimotto Projectors, Tarret UDP,
Short Shifter, Touch Screen Dual Din Radio, 03 4 Bow glass Top (DD & Auto-X since May 17,2012)
Threaded Mode
