Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

Post Reply
 
LinkBack Thread Tools Display Modes
Old 10-08-2010, 12:51 PM   #1
JTP
Registered User
 
Join Date: Aug 2009
Location: MD
Posts: 628
I didn't notice a rattle noise even driving in a parking garage with top down. But, I drove my car once with the engine cover off and noticed a loud tinny rattle like a loose heat shield. Not too worried about it though.
JTP is offline   Reply With Quote
Old 10-10-2010, 08:27 AM   #2
Registered User
 
Join Date: Jan 2008
Location: atl
Posts: 363
i don't have a jack, but i crawled up under where i could. i see the protection plastic guards. but where would i find the heat shields? any pictures out there?
tuanle16 is offline   Reply With Quote
Old 10-10-2010, 04:11 PM   #3
Registered User
 
Join Date: Apr 2009
Location: Australia
Posts: 328
Hi Guys,

hate to sound like a total n00b, but can someone please give some step by step instructions on how to check the lower control arm. Sounds exactly like the problem I'm having.

If I put the car up on some ramps, where should I look (or how should I test) to see if these need replacing. And if they do need replacing, where should I buy the parts from?

Thanks in advance.

Regards,
Sam
sparker is offline   Reply With Quote
Old 10-10-2010, 09:35 PM   #4
Registered User
 
Franco's Avatar
 
Join Date: Sep 2006
Location: Montreal
Posts: 502
Hi,

http://986forum.com/forums/showthread.php?t=17795

__________________
1997 Porsche Boxster manual
2018 Subaru WRX Sport Tech
2014 Honda CRV
2014 Mercedes Benz 350 ML
2015 Chevrolet Corvette Stingray manual
Franco is offline   Reply With Quote
Old 10-10-2010, 09:42 PM   #5
Registered User
 
Join Date: Apr 2009
Location: Australia
Posts: 328
Still doesnt give me the detail I need... Can anyone circle a part from a picture of under a boxster to show me where I need to be checking for wear?

Thanks,
Sam
sparker is offline   Reply With Quote
Old 10-12-2010, 06:06 AM   #6
Registered User
 
Join Date: Jan 2010
Location: Orlando
Posts: 290
OP, let us know how you resolve the issue.

Thanks
Highlow is offline   Reply With Quote
Old 10-12-2010, 03:48 PM   #7
Registered User
 
Join Date: Jan 2008
Location: atl
Posts: 363
still un resolved. annoying. makes my boxster sound cheap. my friends have now even noticed and said something to me the other day. "your car sounds funny everytime you drive away" arrggghh!!
tuanle16 is offline   Reply With Quote
Old 10-14-2010, 06:19 PM   #8
Registered User
 
seningen's Avatar
 
Join Date: Jul 2008
Location: austin
Posts: 825
Quote:
Originally Posted by tuanle16
i don't have a jack, but i crawled up under where i could. i see the protection plastic guards. but where would i find the heat shields? any pictures out there?
basically behind the bumper and above around the exhaust and tranny.

Hope this picture helps.

Mike
Attached Images
 
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
seningen is offline   Reply With Quote
Old 10-16-2010, 07:09 AM   #9
Registered User
 
Join Date: Jan 2008
Location: atl
Posts: 363
wow. awesome pic. thanks. unfortunately, mine is not the heat shield. i found it and played with it. solid. no rattle. it also is not the belt. opened up the engine compartment and did not hear the rattle with the engine on and belt turning. frustrating. i think it's coming from the exhaust system, but just can't localize it specifically. when i tap on the exhaust pipes or cats, i can hear it. but just can't find it!!! arrgghh!!
tuanle16 is offline   Reply With Quote
Old 10-17-2010, 12:44 AM   #10
Registered User
 
Join Date: Jan 2008
Location: atl
Posts: 363
does anyone know of a good porsche shop in atlanta, so that i don't have to go to dealership? i actually did try, but they said that noise was normal. trust me..it is NOT normal. i want to get a second opinion on the matter, and hopefully a cheaper one too. thanks for everyone's input so far.

-tuan
tuanle16 is offline   Reply With Quote
Old 10-19-2010, 04:22 PM   #11
Registered User
 
Join Date: Oct 2010
Location: USA
Posts: 64
I have exactly the same problem you described (the wall, the RPM, etc) in your original posting. It only happened after some hard driving or warmed up car. Took it to my local dealership and they identified the problem as the one of the catalytic convertors (RHS). You do want to get it replaced before the check engine light comes on but have your emissions tested now to see if the cat is still working fine. This may buy you a bit of time. The dealer tested mine and said everything is ok but i should do it sooner rather than later.
BMAN_986 is offline   Reply With Quote
Old 10-19-2010, 04:38 PM   #12
Registered User
 
Join Date: Apr 2009
Location: Australia
Posts: 328
If it was the heat sheild pictured above that was loose, where are the bolts to tighten this? Would like to check.

Regards,
Sam
sparker is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page