Center punch as suggested by blue2000s, or/and you'll have to push in and to an angle, agaist the wall to use as leverage, leaving some cuts on the pipe. You can also cover up the drill with ducktape where it hits the wall to help prevent these cuts. Go slow, into you establish a groove where the drill will stay in place.
See pic below:
__________________
-Cesar
03' 986 Midnight Blue Metallic
_____________________________________________
Gemballa Lowering Springs | 18” Carrera Light Wheels | Painted Calipers
14/18 H&R Spacers | Aero Wing & Rockers | Powder Coated Exhaust
Creator of CRIOS exhaust mod | De-Snorkeled | De-Ambered
Light Weight Flywheel | Tinted Windows and Windscreen
Painted Bumperettes | 550 Spyder Grille Kit
http://lh5.ggpht.com/_9sTq_sN1KDw/Si...2009%20055.jpg
Last edited by crios; 04-16-2009 at 07:30 AM.
|
Threaded Mode
